Note that the sleep(5); to fully idle the gpu is _really_ important.
Without it the bug is not exhibited.
The issue at hand is that after gem_quiescent_gpu we are at max
(expected, since the blocking waits peg to max), but then we never go
down to a lower freq again until we're fully idle. The tiny load is
sufficient to keep the gpu at max. I've played around with this a bit
and even ridiculously low loads (like one MI_STORE per 50ms) are
enough to keep the gpu at max freq.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Apparently some rps chips are prone to stick to max once you're there.
And all the synchronous waits in gem_quiescent_gpu are _really_ good
at forcing the kernel to go full throttle.
And even a positively tiny load (one MI_STORE_IMM per 50 ms) is enough
to eternally keeep it there, which means the first idle measurement of
the freqs before we do the reset it completely busted.
Just add a wait before the tricky test and call it a day.
Option b) would have been to now have this tiny load, but I think a
good reminder how quirky rps is is always welcome. Just in case we
start sleeping too easy at night.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74956
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shorter and more in line with our general igt_ prefix for everything
which isn't somehow intel or i915-gem or otherwise hw specific - these
helpers here are all fully generic framebuffer handling functions
based on kms + cairo.
Well, the actual buffer alloc is done with i915 gem, but meh ;-)
Two special cases:
- bpp_depth_to_drm_format and drm_format_to_bpp completely lacked
prefixes, so just add igt_.
- write_fb was a bit misleading given that we have gem_write for
uploading to buffers. Rename that to write_fb_to_png to make it
crystal clear what this thing does even without looking at docs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the new-style function using drm fourcc codes instead everywhere.
To easily use thew fourcc based interface also expose
bpp_depth_to_drm_format from the library. Finally include drm_fourcc.h
from the igt_kms.h header since pretty much everyone needs this now.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've forgotten that we might want to call this from within specific
subtests (or special helpers like the autoresume one).
Also props for being competent enough to write a testcase, but
incompetent enough to botch the job up.
Fix both things and remove a leftover debug printf while at it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I think we might have some use for a do_ioctl_expected_errno or some
such thing. But that's for later.
Cc: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a speculative test in that it's not particularly relevant
today, but is important if we switch the parser implementation to
use kmap_atomic instead of vmap.
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Start with a simple testcase that should pass.
v2: Switch to I915_PARAM_CMD_PARSER_VERSION
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To gain more coverage on interface, default context and banning.
As there is no proper reset support for gen <= 3, we only
do limited interface testing on those.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And shovel all the various helpers in there.
Also move igt_set_vt_graphics_mode to igt_kms.h since the function is
implemented in igt_kms.c. And it fits better. I kinda missed this in
the prep work.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is prep work to extract a new igt aux library with all kinds
of random stuff. Also give it a bit a more suitable name to
indicate that this is just a flag and doesn't do the aub dumping
itself.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the header cleanup we can now give this header a suitable name,
since it now really only contains register access and other I/O
functions and assorted definitions.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've left unistd.h in it - it's not strictly required but most users
of drmtest.h want it for the open helpers, and then you kinda need to
close that file descriptor again ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only include what the header itself needs. The big fish here is
intel-gpu-tools.h. More will follow.
One ugly thing removed here is the duplicated GEN6_TD_CTL #define, one
of which was broken.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only the igt core and non-test tools should have asserts to catch
internal errors, tests and helper libraries should all user igt_asert
instead.
Fix things up where assert instead of igt_assert was used.
One tiny step towards header sanity.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's unused. There's still num_tiles getting in the way of things,
but that is used by gem_stress a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Step one to properly namespace the rendercpy/mediafill functions. Als
give the buf_height/width helpers a proper igt_ prefix.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And move the public interfaces into intel_batchbuffer.[hc].
A bit messy since we are fairly inconsistent with our header #include
handling.
Also exclude rendercopy.h from the documentation.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've accidentally broken the new cursor size extensions, but it
wasn't quite correct before already: Variables which are set in
igt_fixtures _must_ be outside of the stackframe of the igt_fixture
block.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas noticed that in simulation mode a lot of the tests fall over
instead of skipping properly. This is due to recently added
self-checks which ensure that any call to igt_skip happens either
within a fixture or subtest block (or it's a simple test without
subtests). This is to catch bugs since pretty much always not wrapping
up hardware setup and checks into these blocks is a bug.
Bug simulation skipping is a bit different, so allow that exception.
Otherwise we'd need to fix up piles of tests (and likely need to play
a game of whack-a-mole).
Also add a library testcase for all the different variants to make
sure it really works.
Cc: Thomas Wood <thomas.wood@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
version.h is -include-ed assuming that builddir is the same
as srcdir;
In file included from <command-line>:0:0:
./../../tests/../lib/check-ndebug.h:3:1: fatal error:
../../tests/../version.h: No such file or directory
#endif
^
v2: Use top_builddir as suggested by Damien - builddir gets expanded
to ./ which worked accidentally since automake includes top_builddir
by default.
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v1: Added 128x128 and 256x256 cursor size support.
v2: Refined the test to use igt_subtest_f and automate enumeration.
v3: Restructuring test enumeration using drmGetCap. [Daniel's review comments]
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Functions which provide feature checks through igt_skip should be of
the form <prefix>_require_<feature>.
Otoh feature checks which return in a boolean whether the feature is
available should be of the form <prefix>_has_<feature>, e.g.
gem_has_blt.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also add a missing igt_assert to kms_fbc_crc and again add the missing
Returns: section to the api doc.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also update the api docs a bit since the Returns: section was missing.
v2: Readd the accidentally lost line for @filename.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I suspect that currently we have an issue in there with the runtime PM
refcounting, but silly me developed this on a machine with runtime PM
support ...
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... and I immediately regret that I've killed the return value
for igt_debugfs_init, since we have callers which need to work
without the forcewake stuff, e.g. the reg dumper needs to work
without i915 loaded.
Put this new helper to good use in the mmio code and the pm_pc8
testcase.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Big cores seem to take forever to idle, at least my ivb here. Fairly
ridiculous, so maybe there's more room for our debooster to kick in.
Anyway, this gets the min-max-config-idle and reset subtests going
somewhat reliably on my ivb. They still occasionally fail with the
current frequency pegged to max (or close to it) for no apparent
reason at all. Rebooting tends to fix it.
Don't ask, don't tell.
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Big core platforms need some seriuos omph to break a sweat.
This fixes min-max-config-loaded here on my ivb.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75146
Cc: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
