Add a header that includes all the headers for the library. This allows
reorganisation of the library without affecting programs using it and
also simplifies the headers that need to be included to use the library.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Due to the nature of accessing a tiled buffer in an untiled way, we
used to loop through the whole buffer all the time. Add a small
mechanism to just break in case we know we already wrote every pixel
we should have written.
On kms_frontbuffer_tracknig/fbc-2p-primscrn-pri-shrfb-draw-pwrite
(with a 3200x1800 primary screen and a 1920x1080 secondary screen), I
could reduce the runtime from ~7.53s to ~6.01s.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Don't forget to flush in case we're in the last iteration of the loop.
This fixes failures of kms_frontbuffer_tracking when used with
--use-small-modes on eDP monitors.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We need to test those pixel formats on the FBC code, so let's make
sure the drawing library works on them first.
v2: Update the gtkdoc (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If I have a program with the following:
igt_skip_on(i % 2 == 0);
igt_skip_on_f(i % 2 == 0, "i:%d\n", i);
igt_require(i % 2 == 0);
igt_require_f(i % 2 == 0, "i:%d\n", i);
then I'll get compiler error messages complaining about format
conversions related to the '%' character used in the mod operation. So
put the whole string as a %s argument to avoid interpreting '%' and
any other possible chars.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
From Gen9, by default push constant command is not committed to the shader unit
untill the corresponding shader's BTP_* command is parsed. This is the
behaviour when set shader is enabled. This patch updates the batch to follow
this requirement otherwise it results in gpu hang.
Set shader need to be disabled if legacy behaviour is required.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89959
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Don't set the size of bindless surface state on rendercopy.
And as of doing so, take into account the workaround for setting
the command size.
This was tried during hunting for
https://bugs.freedesktop.org/show_bug.cgi?id=89959. But no
impact was found.
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
The commit "benchmarks: Do not install to system-wide bin/" changed
the benchmark file list from bin_PROGRAMS to benchmarks_PROGRAMS.
However Android.mk was not updated, resulting in IGT failing to
build for Android.
This commit adds that change. It also adds LOCAL_MODULE_PATH to
specify where the built benchmarks should be put.
v2: I discovered that the existing definitions of LOCAL_MODULE_PATH
were creating what should have been an invalid path. Not sure how it
was ever working previously, but fixed now.
Signed-off-by: Derek Morton <derek.j.morton@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Convenience wrapper suggested by Chris for igt_set_timeout(0, NULL).
v2: While at it add an empty line in kms_flip to make
set/reset_timeout a visual block.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
"Timed out" isn't a terribly informative message, allow users to set
something more informative. Inspired by a request from Jesse.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
A helpful function for when you want to read a whole debugfs file to a
string and don't want to worry about opening and closing file
descriptors and asserting buffer sizes.
We've been using this already for kms_frontbuffer_tracking and
kms_fbcon_fbt, so the only test with new code here is kms_fbc_crc.
Also notice that for kms_fbc_crc we had to increase the buffer size
since the file can sometimes be bigger than 64 bytes - depending on
the reason why FBC is disabled.
Of course, there are probably many other programs we can patch, but
I'm not doing this now.
v2: Add the macro to wrap sizeof() (Daniel).
v3: Add documentation for the macro too (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If we are using a streaming GGTT write into the source, we need to
trigger an early fault in order to obtain a mappable offset. This is
required when later we start reserving execbuf object top-down to try
and avoid mappable space!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
SKL changed state base address command.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
BDW changed structure of surface state and interface descriptors.
Commands like state base address, gpgpu walker were extended.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
The gpgpu fill utility functions are used in separate test so it's
logical to keep them in separate file. This is similar to what media
spin test did in the past.
Functionally only gpgpu kernel changed. Send instruction payload size
was reduced. Since offset is incremented by 0x10 bytes there is no point
in using larger writes.
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Dominik Zeromski <dominik.zeromski@intel.com>
[Thomas: Fix typo of gpgpu_fill.h in Makefile.sources]
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Exit immediately if the test is already exiting and igt_fail is called.
This can happen if an igt_assert fails in an exit handler.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91349
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
We don't always have precise integers with which to store, so allow
degrading to double precision floating point based on available input.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
And drop the now unnecessary universal plane definitions. The 2.4.55
version is already quite old, so we should be fine.
Thanks to Thomas Wood for quickly spotting this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@>
I just remembered that those Makefile.sources files where also
included by the Android build system, so we can't use automake's
conditionals in there.
So, we want to use GNU make's one. Unfortunately, after all those years,
GNU automake still doesn't do anything useful with GNU make's ifeq:
lib/Makefile.sources:66: error: else without if
automake will helpfully signal that the 'else' corresponding to the
'ifeq' doesn't have a corresponding 'if'. Well, yeah, thanks.
Fortunately, we can work around this by cunningly inserting a space
before 'ifeq', 'else' and 'endif' and fool automake's regex-based
checks.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
When developing, it's quite annoying that the version changes every
commit, causing the library to be rebuild and every single binary
re-linked.
Add a config option to skip that.
I remember Ville asking for this "feature" as well.
v2: Option is now called --disable-git-hash (Thomas)
Various spelling mistakes (Thomas)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
igt_save_module_param is an internal static function and therefore isn't
included in the public API documentation.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
The section id is generated from the section title and is used to create
the html output filename, which therefore causes problems if it includes
a '/' character.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
https://en.wikipedia.org/wiki/Trimean
The trimean is a the most efficient 3-point L-estimator (estimator
of central tendency, i.e. average), even more robust than the
median at estimating the average of a sample population.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
https://en.wikipedia.org/wiki/Interquartile_mean
The IQM is a truncated mean and so is very similar to the scoring
method used in sports that are evaluated by a panel of judges:
discard the lowest and the highest scores; calculate the mean
value of the remaining scores.
It's useful to hide outliers in measurements (due to cold cache etc),
without having to worry too much about the actual distribution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris mentioned he wanted to be able to measure a variable "for one
second" and use igt_stats to store them. That's one case where we don't
know the number of data points upfront.
We should really support that, so here it is.
v2: Just free ->sorted when a new capacity is needed.
ensure_sorted_values() will then reallocate the array to the new
capacity on demand (Chris)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Chris had a doubt, and I was lazy and didn't do a similar test for the
quartiles/median than for the mean (test_invalidate_mean()). Plug that
gap.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
