In the reset-pin-leak test we were calling
igt_set_stop_rings(STOP_RING_DEFAULTS) which sets the
stop_rings bits for all gpu engines. But we only submit
work to the render engine. When TDR is enabled (as it is
in Android currently) only the render engine gets reset,
which clears the stop_rings bit for the render engine but
not for the other engines. This causes the test to fail on
the second iteration because stop_rings is not clear.
So just set the stop_rings bit for the engine we are going
to hang, namely the render engine.
Signed-off-by: Tim Gore <tim.gore@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
I'm using this to debug some aspects of the GTT tracking.
While at it, do a small rename and fix the ASCII art.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Add a header that includes all the headers for the library. This allows
reorganisation of the library without affecting programs using it and
also simplifies the headers that need to be included to use the library.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Just like we did for PSR, let's do it for FBC. FBC gets reenabled in
just 50ms, so the 5000ms timeout is huge. On the other hand, we only
pay the 5000ms timeout full price 9 times when running
kms_frontbuffer_tracking --fbc-only, so this change shouldn't save too
much time.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
PSR only takes up to 100ms to be enabled, but we were using 5000ms
timeouts. The problem with PSR is that the MMAP_GTT tests have to
assert that PSR is disabled and stays disabled during the whole
timeout, so that 5s cost is a little to high when we consider that we
do the full 5s wait 74 times when running kms_frontbuffer_tracking
--psr-only.
By reducing to 2s we still make sure we're safe, since we're waiting
20x the time PSR needs to get reenabled, and we reduce the runtime of
running kms_frontbuffer_tracking --psr-only from 14m10s to 10m29s.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If we already tested the combination of m1+m2, don't test m2+m1 later:
the drawing pattern used already has 4 squares, so we're already
testing the "m2 followed by m1" case.
This should reduce the test time from about 60s to about 30s.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Instead of having a single pair of methods per subtest. Having this in
pairs is not very useful since we end doing all the drawing methods
per subtest anyway.
This saves a few modesets, which makes eDP slightly faster - about 22s
on my local machine.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We now have per-pixel-format FBs and CRC values. Also t->format to
indicate the format we're using on the subtest. We still only use the
default RGB888 format (AKA FORMAT_DEFAULT) for all tests since
multiplying the current number of tests by the number of new pixel
formats doesn't sound like a great idea.
With this, it should be really easy to add new tests that use
different pixel formats.
Also, if you want a full IGT run on a specific pixel format, all you
need to do is to change FORMAT_DEFAULT.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We're not using those formats yet, but a simple change to create_fb()
allows us to use these formats without problems now.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We want to add support for different pixel formats and the current
hardcoded pixel values won't work with that. So add enum color and
its auxiliary functions so we can decide the pixel values based on the
chosen color enum.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It is create_fb() who is going to decide the buffer format based on
the arguments provided by the caller. This is another step for the
non-XRGB8888 support.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
The wrapper will do a few additional things when we add support for
formats different than XRGB8888.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Now that the MMAP_WC operations call the dirty ioctl, PSR gets
reenabled after some time. So we have to adjust op_disables_psr() to
take that into account.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We need to test those pixel formats on the FBC code, so let's make
sure the drawing library works on them first.
v2: Update the gtkdoc (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
These always need to pass for basic PM functionality.
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We should be able to adjust the backlight and observe changes in sysfs.
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We should always be able to create simple and tiled objects.
v2: make the whole test basic (Daniel)
add to .gitignore
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
These simple tests should always pass.
v2: drop pwrite variant as it's more of a stress test (Daniel)
add to .gitignore
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
These ones should always pass and are fairly quick.
v2: add more tests (Daniel)
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We should be able to create small and moderate sized objects quickly and
without errors.
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Fundamental and simple functionality.
v2: make whole test basic (Daniel)
add to .gitignore
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
They're testing basic functionality and don't involve stress or race
induction.
v2: use gem_flink and prime_self_import tests instead (Daniel)
add to .gitignore
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
There was a lot of duplication going on... Mark as basic while we're at
it as these should never fail.
v2: add to .gitignore
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Daniel complained that all the tests in gem_mmap.c were too quick. This
one aims to rectify that by double checking that if we mmap a buffer
larger enough to force swapping, everything still works.
Also fix the test to exercise the different object sizes!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The goal of the multidraw subtest is to check if alternating drawing
methods can somehow break the feature. The plane we're drawing to
really shouldn't matter here - we have other tests to make sure
drawing on the different planes works correctly. So after this patch
we'll only run the multidraw subtest for the primary plane, not for
sprite and cursors anymore.
This makes "--no-edp --fbc-only --1p-only" go from 2m29s to 1m40s on
my machine.
Of course, we can still run these tests with the --show-hidden flag.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We already tested these planes for FBS_INDIVIDUAL, and there are no
reasons to believe those planes will behave differently under
FBS_SHARED, so save some time avoiding potentially useless tests.
This makes "--no-edp --fbc-only --1p-only" go from 2m49s to 2m29s on
my machine.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
The commit "benchmarks: Do not install to system-wide bin/" changed
the benchmark file list from bin_PROGRAMS to benchmarks_PROGRAMS.
However Android.mk was not updated, resulting in IGT failing to
build for Android.
This commit adds that change. It also adds LOCAL_MODULE_PATH to
specify where the built benchmarks should be put.
v2: I discovered that the existing definitions of LOCAL_MODULE_PATH
were creating what should have been an invalid path. Not sure how it
was ever working previously, but fixed now.
Signed-off-by: Derek Morton <derek.j.morton@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
The test does the following
1. set_domain src GTT
2. set_caching src NONE
3. pwrite src
4. set_caching src CACHED
5. blt src->dst
6. pread dst
7. verify data matches
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
igt_plane_set_fb()+igt_display_commit() have too much overhead, and that
causes the cache to get flushed before we flip, making the test
useless, at least on machines with small LLC. Switch to
drmModeSetPlane() to reduce the chance that the cache gets flushed
before we grab the crc.
Still nowhere near 100% reliable on my IVB laptop with 3 MiB LLC,
but at least it can now hit the problem occasioanally. My desktop
IVB with 8 MiB LLC seems to hit it rather reliably.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Our invalid-flags/params testcases are meant to catch abi extensions
by just testing for the next available flag/param. Unfortunately we
need that since without those we forgot to write testcases for these
new flags way too often :(
But it's not entirely clear why this is, so document this trick with
comments.
Also gem_wait wasn't this paranoid, so change the testcase to be so.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Convenience wrapper suggested by Chris for igt_set_timeout(0, NULL).
v2: While at it add an empty line in kms_flip to make
set/reset_timeout a visual block.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
"Timed out" isn't a terribly informative message, allow users to set
something more informative. Inspired by a request from Jesse.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This reverts commit 0b45b0746f45deea11670a8b2c949776bbbef55c.
We want to check against our local copy of the params so we can at least
potentially catch new flag additions.
Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Use -1 as the invalid param since we've added more since this test was
created, causing expected EINVAL failures to return an unexpected error
code.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
A helpful function for when you want to read a whole debugfs file to a
string and don't want to worry about opening and closing file
descriptors and asserting buffer sizes.
We've been using this already for kms_frontbuffer_tracking and
kms_fbcon_fbt, so the only test with new code here is kms_fbc_crc.
Also notice that for kms_fbc_crc we had to increase the buffer size
since the file can sometimes be bigger than 64 bytes - depending on
the reason why FBC is disabled.
Of course, there are probably many other programs we can patch, but
I'm not doing this now.
v2: Add the macro to wrap sizeof() (Daniel).
v3: Add documentation for the macro too (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
