We do not have GLib there so it does not build.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tests depend on assertions being enabled since they can, and do,
contain actual test steps. They are also mandatory for ensuring
sane test case behaviour.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Android apparently compiles with NDEBUG. Which is strongly advised
against, since the big pile of asserts mostly check correct usage of
the helper code in testcases.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the one that already works in libdrm, so don't disappoint people
coming with expectations.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
kms_fbc_crc will perform various write operations to the scanout buffer
whilc FBC is enabled. CRC checks will be used to make sure the
modifcations to scanout buffer are detected.
The operations include:
- page flip
- GTT mmap
- CPU mmap
- blit
- rendercopy
- context switch + rendercopy
- combination of a page flip and each operation listed above
v2: Use gem_sw_finish instead of drmModeDirtyFB after CPU access
v3: Drop pwrite tests, call gem_bo_busy() after rendering, drop
set_domain() calls after mmap access, wait for 2 vblanks
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
rendercopy does the batch buffer flush internally, so if we want
to use it with multiple contexts, we need to pass the context
in from caller.
v2: Modify rendercopy_gen8 as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
If a subtest fails, it'll leave the pipe CRC file open, which will
prevent subsequent subtests from opening the file. Make sure the file
is cloesed before trying to open it again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Inspired by the recent pile of tests for the CS, which doesn't split
up the tests into per-ring subtests.
Cc: bradley.d.volkin@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This one was missing. For some reason we never really detected it on
our test suite. I checked the Kernel source and now we should be fine.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Instead of creating a new FB every time we need one, create a cache of
FBs and reuse whenever possible. That means we'll create at most two
FBs, and reuse them hundreds and hundreds of times.
The kmstest_paint_test_pattern function takes about 1-2 seconds to
run, and we'll avoid it whenever we reuse the FB.
This makes the time taken to run the modeset-lpsp-stress subtest go
from 2:29 to 1:29.
A full "time ./pm_pc8 --quick" goes from 8:14 to 6:27.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If we want to actually reach PC8+ states, we need to properly
configure all the devices on the system to allow this. This function
will try to setup the things we know we need, but won't scream in case
anything fails: we don't know which devices are present on your
machine, so we can't really expect anything, just try to help with the
more common problems.
Another reason for this commit is that I got tired of having to
readjust the runtime PM policies every time I reboot my machine.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Getting global reset count needs to be tested with root and
non root access.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To make driver report a simulated hang in dmesg.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For BDW+, there BATCH_BUFFER_START is 3 * 32bits in length and
length needs to be encoded into the opcode.
Suggested-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of freaking out about negating the skip condition and punting
I could have remembered that I've solved this already ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not meant to be used on the QA cycles, but by developers who just want
to quickly check things while doing development. Reduces the total
time from 27 minutes to 6 minutes on my machine.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
I was suspecting some problems just happen if we have a bigger wait
than the current ones we have, so add a new WAIT_EXTRA flag just to
see if the problems really happen. Also, add support for the wait
flags on the gem stress tests, and use them.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It's not executed by default, and it's completely relying on Haswell
registers and on internal knowledge of how the Kernel is supposed to
work. Since we plan to test generic runtime PM on all supported
platforms, maintaining this test so it works on all those platforms
will be a pain. We already have some ideas on how to verify registers
that must stay at specific values from inside the Kernel, so let's
kill this test and wait until the proper Kernel code gets merged.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Since we're not only testing PC8 anymore, we're resting "PM", rename
some variables from something_pc8 to something_suspend, just to make
it not-so-confusing.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We don't wake up from forcewake when we only have PC8, but not runtime
PM, so make the test pass.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If you really want to reach the PC8+ states and consequently get PC8+
residency, you need to properly configure all the devices on your
machine to allow PC8+, not just graphics. The current code for PC8
checks for PC8+ residency everywhere, so if you have a machine that's
not properly configured you'll fail every test. OTOH, even if your
machine can't reach the PC8+ states, it will still try to enable and
disable PC8, so we can try to test the feature even if we're never
really reaching the PC8+ states. Also, if your machine does allow PC8+
residencies, but some other driver/program decides to keep the machine
busy while you're running the test suite, you'll also get failures
which you shouldn't be getting.
Based on the arguments above, I'm changing most of the subtests to
only check for the PC8 status reported by sysfs (enabled/disabled),
not check real PC8+ residency. I also added two tests that should
check for PC8+ residency, so we will stil be able to diagnose badly
configured machines.
As a bonus, we won't sleep for full 5 seconds every time we expect PC8
to be disabled: we'll just read i915_pc8_status, which quickly gives
the result we're expecting. Considering how many modeset stress
subtests we have in the program, we'll save a *lot* of time with this
change.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
We try to detect if we have runtime PM or if we just have PC8. In case
there's runtime PM, the functions that wait will wait for the runtime
PM status reported by the sysfs file instead of waiting for PC8
residencies to move.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
This way the igt test will always be killed first (hopefully),
preventing mayhem when one of the memory thrashing tests treatens to
take down the entire system.
To avoid any burden on test writers we adjust the oom score on
drm_open, any of the fork helpers and subtest init. That should cover
everything.
v2: Fix it up.
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: check the ioctl pad and flag parameters
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These form the basis of the new Android build system.
v2: As suggested by Daniel Vetter, modify compilation flags to
not error on return-type and not warn on sign-compare.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
