11 KiB
16.4: Using PSBTs in Libwally
NOTE: This is a draft in progress, so that I can get some feedback from early reviewers. It is not yet ready for learning.
You learned all about Partially Signed Bitcoin Transactions (PSBTs) in §7.1 and §7.2, and as you saw in §7.3: Integrating with Hardware Wallets, one of their prime advantages is being able to integrate with offline nodes, such as Hardware Wallets. HWI allowed you to pass commands to a Hardware Wallet, but what does the wallet itself use to manage the PSBTs? As it happens, it can use something like Libwally, as this section demonstrates.
Basically, Libwally has all the PSBT functionality, so if there's something you could do with bitcoind, you could also do it using Libwally, even if your device is offline. What follows is the barest introduction to what's a very complex topic.
Converting a PSBT
Converting a PSBT into Libwally's internal structure is incredibly easy, you just run wally_psbt_from_base64 with a base64 PSBT (which means the outputs you received from bitcoind, like:
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
However, it's a bit harder to deal with the result, because Libwally converts it into a very complex wally_psbt structure.
Here's how it's defined in /usr/include/wally_psbt.h:
struct wally_psbt {
unsigned char magic[5];
struct wally_tx *tx;
struct wally_psbt_input *inputs;
size_t num_inputs;
size_t inputs_allocation_len;
struct wally_psbt_output *outputs;
size_t num_outputs;
size_t outputs_allocation_len;
struct wally_unknowns_map *unknowns;
uint32_t version;
};
struct wally_psbt_input {
struct wally_tx *non_witness_utxo;
struct wally_tx_output *witness_utxo;
unsigned char *redeem_script;
size_t redeem_script_len;
unsigned char *witness_script;
size_t witness_script_len;
unsigned char *final_script_sig;
size_t final_script_sig_len;
struct wally_tx_witness_stack *final_witness;
struct wally_keypath_map *keypaths;
struct wally_partial_sigs_map *partial_sigs;
struct wally_unknowns_map *unknowns;
uint32_t sighash_type;
};
struct wally_psbt_output {
unsigned char *redeem_script;
size_t redeem_script_len;
unsigned char *witness_script;
size_t witness_script_len;
struct wally_keypath_map *keypaths;
struct wally_unknowns_map *unknowns;
};
These in turn use some transaction structures defined in /usr/include/wally_transaction.h:
struct wally_tx {
uint32_t version;
uint32_t locktime;
struct wally_tx_input *inputs;
size_t num_inputs;
size_t inputs_allocation_len;
struct wally_tx_output *outputs;
size_t num_outputs;
size_t outputs_allocation_len;
};
struct wally_tx_output {
uint64_t satoshi;
unsigned char *script;
size_t script_len;
uint8_t features;
};
There's a lot there! Though much of this should be familiar from pervious chapters, it's a bit overwhelming to see it all laid out in C structures.
Reading a Converted PSBT
Obviously, you can read anything out of a PSBT structure by calling up the individual elements from the various substructures. The following is a brief overview showing how to grab a few of the elements.
Here's an example of retrieving the values and scriptPubKeys of the inputs:
int inputs = psbt->num_inputs;
printf("TOTAL INPUTS: %i\n",inputs);
for (int i = 0 ; i < inputs ; i++) {
printf("\nINPUT #%i: %i satoshis\n",i, psbt->inputs[i].witness_utxo->satoshi);
char *script_hex;
wally_hex_from_bytes(psbt->inputs[i].witness_utxo->script,psbt->inputs[i].witness_utxo->script_len,&script_hex);
printf("scriptPubKey: %s\n",script_hex);
wally_free_string(script_hex);
}
This programming pattern will be used on many parts of the PSBT. You look at the size of the inputs array, then you step through it, retrieving what you want to see (in this case, satoshis and scripts).
Here's a similar example for the outputs:
int outputs = psbt->num_outputs;
printf("\nTOTAL OUTPUTS: %i\n",outputs);
for (int i = 0 ; i < outputs ; i++) {
char *pubkey_hex;
wally_hex_from_bytes(psbt->tx->outputs[i].script,psbt->tx->outputs[i].script_len,&pubkey_hex);
printf("\nINPUT #%i\n",i);
printf("scriptPubKey: %s\n",pubkey_hex);
wally_free_string(pubkey_hex);
}
Obviously, there's a lot more you could look at in the PSBTs. In fact, looking is the main point of a PSBT: you can verify inputs and outputs from an offline computer.
⚠️ WARNING: These reading functions are very rudimentary and will not work properly for extremly normal situations like an input or output that's still empty or that includes a
non_witness_utxo. They will segfault if they aren't delivered a perfectly expected PSBT. A real reader would need to be considerably more robust, to cover all possible situations, and that's left as an exercise for the reader.
Testing Your PSBT Reader
Again, the code for this (extremely rudimentary and specific) PSBT reader is in the src directory.
You can compile it as normal:
$ cc examinepsbt.c -lwallycore -o examinepsbt
The following PSBT from §7.3 can be used for testing as it matches the very narrow criteria required by this limited implementation:
psbt=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
Run examinepsbt with that PSBT, and you should see the scripts on the inputs and the outputs:
$ ./examinepsbt $psbt
TOTAL INPUTS: 2
INPUT #0: 1000000 satoshis
scriptPubKey: 001400193c8bf25ef056f8d4571a1c3f65123e5fe788
INPUT #1: 1000000 satoshis
scriptPubKey: 00142d4f139faa885304d15616a166d2d51574af4a5d
TOTAL OUTPUTS: 2
INPUT #0
scriptPubKey: 0014c772d6f95542e11ef11e8efc7c7a69830ad38a05
INPUT #1
scriptPubKey: 0014f4e8dde5db370898b57c84566e3f76098850817d
And of course, you can check this with the decodepsbt RPC command for bitcoin-cli:
$ bitcoin-cli decodepsbt $psbt
{
"tx": {
"txid": "45f996d4ff8c9e9ab162f611c5b6ad752479ede9780f9903bdc80cd96619676d",
"hash": "45f996d4ff8c9e9ab162f611c5b6ad752479ede9780f9903bdc80cd96619676d",
"version": 2,
"size": 154,
"vsize": 154,
"weight": 616,
"locktime": 0,
"vin": [
{
"txid": "5b3c4aeb811f9a119fd633b12a6927415cc61b8654628df58e9141cab804bab8",
"vout": 0,
"scriptSig": {
"asm": "",
"hex": ""
},
"sequence": 4294967294
},
{
"txid": "c733533eb1c052242f9ed89cd8927aedb41852156e684634ee7c74028774e595",
"vout": 1,
"scriptSig": {
"asm": "",
"hex": ""
},
"sequence": 4294967294
}
],
"vout": [
{
"value": 0.01500000,
"n": 0,
"scriptPubKey": {
"asm": "0 c772d6f95542e11ef11e8efc7c7a69830ad38a05",
"hex": "0014c772d6f95542e11ef11e8efc7c7a69830ad38a05",
"reqSigs": 1,
"type": "witness_v0_keyhash",
"addresses": [
"tb1qcaedd724gts3aug73m78c7nfsv9d8zs9q6h2kd"
]
}
},
{
"value": 0.00499791,
"n": 1,
"scriptPubKey": {
"asm": "0 f4e8dde5db370898b57c84566e3f76098850817d",
"hex": "0014f4e8dde5db370898b57c84566e3f76098850817d",
"reqSigs": 1,
"type": "witness_v0_keyhash",
"addresses": [
"tb1q7n5dmewmxuyf3dtus3txu0mkpxy9pqtacuprak"
]
}
}
]
},
"unknown": {
},
"inputs": [
{
"witness_utxo": {
"amount": 0.01000000,
"scriptPubKey": {
"asm": "0 00193c8bf25ef056f8d4571a1c3f65123e5fe788",
"hex": "001400193c8bf25ef056f8d4571a1c3f65123e5fe788",
"type": "witness_v0_keyhash",
"address": "tb1qqqvnezljtmc9d7x52udpc0m9zgl9leugd2ur7y"
}
},
"bip32_derivs": [
{
"pubkey": "030168d9482e2b02d7027fb4a89edc54adaa1adf709334f647d0a1b0533828aec5",
"master_fingerprint": "9a1d520b",
"path": "m/84'/1'/0'/0/569"
}
]
},
{
"witness_utxo": {
"amount": 0.01000000,
"scriptPubKey": {
"asm": "0 2d4f139faa885304d15616a166d2d51574af4a5d",
"hex": "00142d4f139faa885304d15616a166d2d51574af4a5d",
"type": "witness_v0_keyhash",
"address": "tb1q948388a23pfsf52kz6skd5k4z4627jja2evztr"
}
},
"bip32_derivs": [
{
"pubkey": "02a013cf9c4b5f5689d9253036a3e477cf98689626f7814c94f092726f11b741ab",
"master_fingerprint": "9a1d520b",
"path": "m/84'/1'/0'/0/0"
}
]
}
],
"outputs": [
{
},
{
"bip32_derivs": [
{
"pubkey": "03d942b59eea527d70bcd67981eb95d9fa9625269fd6eb0364e452ede59092c7a9",
"master_fingerprint": "9a1d520b",
"path": "m/84'/1'/0'/1/1"
}
]
}
],
"fee": 0.00000209
}
You can see the input satoshis and scriptPubKey clearly listed in the inputs and the new scriptPubKeys in the tx's vout.
So, it's all there for your gathering!
Creating a PSBT
As noted at the head of this section, all of the functions to need to create and process PSBTs are available in Libwally. Actually running through the process of doing so is complex enough that it's beyond the scope of this section, but here's a quick run-down of the steps, which are all fully documented.
[COMMANDS]