ntel-gpu-tools/tests/Makefile.sources
Ville Syrjälä a7882a31cb tests/kms_chv_cursor_fail: Add a test to exercise CHV pipe C cursor fail
The test tries to anger CHV pipe C cursor by walking the edges of the
screen while moving the cursor across the screen edge.

The actual hw issue only occurs on pipe C, and only on the left screen
edge. The testcase can walk all the edges though, and on all pipes, just
so I could make sure the failure doesn't occur there.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-01-08 15:01:59 +02:00

255 lines
5.1 KiB
Makefile

NOUVEAU_TESTS_M = \
prime_nv_api \
prime_nv_pcopy \
prime_nv_test \
$(NULL)
TESTS_progs_M = \
core_get_client_auth \
drv_getparams_basic \
drv_suspend \
drv_hangman \
gem_bad_reloc \
gem_basic \
gem_caching \
gem_close_race \
gem_concurrent_blit \
gem_concurrent_all \
gem_create \
gem_cs_tlb \
gem_ctx_param_basic \
gem_ctx_bad_exec \
gem_ctx_exec \
gem_dummy_reloc_loop \
gem_eio \
gem_evict_alignment \
gem_evict_everything \
gem_exec_alignment \
gem_exec_bad_domains \
gem_exec_faulting_reloc \
gem_exec_nop \
gem_exec_params \
gem_exec_parse \
gem_fenced_exec_thrash \
gem_fence_thrash \
gem_fence_upload \
gem_flink_basic \
gem_flink_race \
gem_linear_blits \
gem_madvise \
gem_mmap \
gem_mmap_gtt \
gem_mmap_wc \
gem_partial_pwrite_pread \
gem_persistent_relocs \
gem_pipe_control_store_loop \
gem_ppgtt \
gem_pread \
gem_pread_after_blit \
gem_pwrite \
gem_pwrite_pread \
gem_pwrite_snooped \
gem_readwrite \
gem_read_read_speed \
gem_reloc_overflow \
gem_reloc_vs_gpu \
gem_render_copy_redux \
gem_request_retire \
gem_reset_stats \
gem_ringfill \
gem_set_tiling_vs_blt \
gem_softpin \
gem_stolen \
gem_storedw_batches_loop \
gem_streaming_writes \
gem_tiled_blits \
gem_tiled_partial_pwrite_pread \
gem_userptr_blits \
gem_write_read_ring_switch \
kms_addfb_basic \
kms_atomic \
kms_chv_cursor_fail \
kms_cursor_crc \
kms_draw_crc \
kms_fbc_crc \
kms_fbcon_fbt \
kms_flip \
kms_flip_event_leak \
kms_flip_tiling \
kms_frontbuffer_tracking \
kms_legacy_colorkey \
kms_mmio_vs_cs_flip \
kms_pipe_b_c_ivb \
kms_pipe_crc_basic \
kms_plane \
kms_psr_sink_crc \
kms_render \
kms_rotation_crc \
kms_setmode \
kms_universal_plane \
kms_vblank \
kms_crtc_background_color \
kms_plane_scaling \
kms_panel_fitting \
pm_backlight \
pm_lpsp \
pm_rpm \
pm_rps \
pm_rc6_residency \
pm_sseu \
prime_self_import \
template \
$(NULL)
TESTS_progs = \
core_auth \
core_getclient \
core_getstats \
core_getversion \
core_prop_blob \
core_setmaster_vs_auth \
drm_import_export \
drm_read \
drm_vma_limiter \
drm_vma_limiter_cached \
drm_vma_limiter_cpu \
drm_vma_limiter_gtt \
gem_bad_length \
gem_cpu_reloc \
gem_cs_prefetch \
gem_ctx_bad_destroy \
gem_ctx_basic \
gem_ctx_create \
gem_ctx_thrash \
gem_double_irq_loop \
gem_exec_big \
gem_exec_blt \
gem_exec_lut_handle \
gem_fd_exhaustion \
gem_gtt_cpu_tlb \
gem_gtt_hog \
gem_gtt_speed \
gem_hangcheck_forcewake \
gem_largeobject \
gem_lut_handle \
gem_mmap_offset_exhaustion \
gem_media_fill \
gem_gpgpu_fill \
gem_pin \
gem_reg_read \
gem_render_copy \
gem_render_linear_blits \
gem_render_tiled_blits \
gem_ring_sync_copy \
gem_ring_sync_loop \
gem_multi_bsd_sync_loop \
gem_seqno_wrap \
gem_set_tiling_vs_gtt \
gem_set_tiling_vs_pwrite \
gem_storedw_loop \
gem_threaded_access_tiled \
gem_tiled_fence_blits \
gem_tiled_pread_basic \
gem_tiled_pread_pwrite \
gem_tiled_swapping \
gem_tiled_wb \
gem_tiled_wc \
gem_tiling_max_stride \
gem_unfence_active_buffers \
gem_unref_active_buffers \
gem_wait \
gem_workarounds \
gen3_mixed_blits \
gen3_render_linear_blits \
gen3_render_mixed_blits \
gen3_render_tiledx_blits \
gen3_render_tiledy_blits \
gen7_forcewake_mt \
kms_3d \
kms_fence_pin_leak \
kms_force_connector_basic \
kms_pwrite_crc \
kms_sink_crc_basic \
prime_udl \
$(NULL)
# IMPORTANT: The ZZ_ tests need to be run last!
# ... and make can't deal with inlined comments ...
TESTS_scripts_M = \
$(NULL)
TESTS_scripts = \
debugfs_emon_crash \
drv_debugfs_reader \
drv_missed_irq_hang \
drv_module_reload_basic \
kms_sysfs_edid_timing \
sysfs_l3_parity \
test_rte_check \
tools_test \
$(NULL)
# This target contains testcases which support automagic subtest enumeration
# from the piglit testrunner with --list-subtests and running individual
# subtests with --run-subtest <testname>
#
# Your testcase should probably use an igt_main and igt_fixture and should have
# a pile of igt_subtest blocks.
multi_kernel_tests = \
$(TESTS_progs_M) \
$(TESTS_scripts_M) \
$(NULL)
# This target is for simple testcase which don't expose any subtest.
#
# Your testcase should probably use igt_simple_main, but none of the other magic
# blocks like igt_fixture or igt_subtest.
single_kernel_tests = \
$(TESTS_progs) \
$(TESTS_scripts) \
$(NULL)
kernel_tests = \
$(single_kernel_tests) \
$(multi_kernel_tests) \
$(NULL)
# Test that exercise specific asserts in the test framework library and are
# hence expected to fail.
XFAIL_TESTS = \
igt_no_exit \
igt_no_exit_list_only \
igt_no_subtest \
$(NULL)
# IMPORTANT: These tests here are all disabled because the result in sometime
# unrecoverable gpu hangs. Don't put real testcases here.
HANG = \
gem_bad_batch \
gem_hang \
gem_bad_blit \
gem_bad_address \
gem_non_secure_batch \
$(NULL)
scripts = \
check_drm_clients \
ddx_intel_after_fbdev \
debugfs_wedged \
drm_lib.sh \
$(NULL)
IMAGES = pass.png 1080p-left.png 1080p-right.png
testdisplay_SOURCES = \
testdisplay.c \
testdisplay.h \
testdisplay_hotplug.c \
$(NULL)
TESTS_progs += testdisplay
common_files = \
eviction_common.c \
$(NULL)