This program can be used to detect when the writes don't land in scanout due
cache incoherency. Although this seems a problem inherently of non-LCC machines
("Atom"), this particular test catches a cache dirt on scanout on LLC machines
as well. It's inspired in Ville's kms_pwrite_crc.c and can be used also to test
the correctness of the driver's begin_cpu_access (TODO end_cpu_access).
To see the need for flush, one has to run this same binary a few times cause
it's not 100% reproducible (in my Core machine it's always possible to catch
the problem by running it at most 5 times).
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
This patch adds test_correct_cpu_write, which maps the texture buffer through a
prime fd and then writes directly to it using the CPU. It stresses the driver
to guarantee cache synchronization among the different domains.
This test also adds test_forked_cpu_write, which creates the GEM bo in one
process and pass the prime handle of the it to another process, which in turn
uses the handle only to map and write. Grossly speaking this test simulates
Chrome OS architecture, where the Web content ("unpriviledged process") maps
and CPU-draws a buffer, which was previously allocated in the GPU process
("priviledged process").
This requires kernel modifications (Daniel Thompson's "drm: prime: Honour
O_RDWR during prime-handle-to-fd").
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
- Remove pattern_check(), which was walking through a useless iterator
- Remove superfluous PROT_WRITE from gem_mmap, in test_correct()
- Add binary file to .gitignore
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
This test has the following subtests:
- test_correct for correctness of the data
- test_map_unmap checks for mapping idempotency
- test_reprime checks for dma-buf creation idempotency
- test_forked checks for multiprocess access
- test_refcounting checks for buffer reference counting
- test_dup chats that dup()ing the fd works
- test_errors checks the error return values for failures
- test_aperture_limit tests multiple buffer creation at the gtt aperture
limit
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
If we are using a streaming GGTT write into the source, we need to
trigger an early fault in order to obtain a mappable offset. This is
required when later we start reserving execbuf object top-down to try
and avoid mappable space!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
It is possible to race between unreference of the underlying BO and
importing it from prime_fd/name. Verify that the behaviour of libdrm
is consistent for prime/flink.
v2: more comments in source file, dropped extra whitespace
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
When reading the timestamp register with single 64b read, we are observing
invalid values on x86_64:
[f = valid counter value | X = garbage]
i386: 0x0000000fffffffff
x86_64: 0xffffffffXXXXXXXX
Test checks if the counter is moving and increasing.
Add a check to see if we can use (reg | 1) flag to get a proper 36b timestamp,
shifting the value on x86_64 if we can't.
v2: More iterations of monotonic test, comments, minor fixups (Chris)
v3: Skip tests if reg_read is not supported
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
If we are waiting on a handle, and its request is cancelled due to a
hang, we should report that explicitly through the ABI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This test should test the interactions between fbcon and the
frontbuffer tracking infrastructure.
Right now the PSR test fails, but as soon as we merge the following
kernel patches, the test wills tart passing:
- drm/i915: PSR: Flush means invalidate + flush
- drm/i915: fbdev restore mode needs to invalidate frontbuffer
- drm/i915: fbdev_set_par reliably invalidating frontbuffer
I didn't want to make this a subtest of kms_frontbuffer_tracking just
because when I wrote it, I really didn't have in mind the fact that
someone might just close the DRM fd in the middle of a subtest.
After this commit we'll have a little bit of duplicated code among
tests. I'll clean this up later.
v2:
- Refactor the code a little bit.
- Add the suspend subtests.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
So we don't need to initialize CRCs we won't use. This makes the
modesetfrombusy and badstride tests a little faster.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
And drop the now unnecessary universal plane definitions. The 2.4.55
version is already quite old, so we should be fine.
Thanks to Thomas Wood for quickly spotting this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@>
Since on BDW the big modes work fine, I want to test them without
having to recompile the test every time. Let's make std_1024_mode part
of opt.small_modes.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
After the last commit, it's not really needed anymore, so let's get
rid of it: less code lines and less non-standard enums.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Make sure the features are disabled and stay disabled. Otherwise we
could just wrongly think they are disabled while they are just in the
process of being enabled.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
I tried explaining these to people twice and realized how bad the
current naming was. Let's hope the new one is better.
The downside is that the tests were renamed and patches mentioning
them can't be fixed.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
So we can make sure all code paths are properly exercised and lead to
proper frontbuffer tracking.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Only really assert FBC_DISABLED in case the primary plane is actually
disabled. If the sprite plane is covering the whole screen but the
primary plane is still enabled, FBC can remain enabled.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
While debugging the test failures I tried different values for the
offsets, so having a central place to change them is the only sane
way.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
SKL and BXT have some new plane capabilities that previous generations
didn't have; we need to update some of our universal plane tests to
expect success rather than failure when running on these platforms.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Make sure resource streamer flags works only in correct ring in
addition to checking next flag after the RS boundary fails.
v2: Make sure we reject RS on pre-hsw.
v3: Don't skip 1<<15 for the exec flags (Jani Nikula)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Since the introduction of igt_stats and its usage in gem_exec_nop, we
need to link the tests against libm. My rebasing bot complained when
linking gem_exec_nop:
lib/igt_stats.c:492: undefined reference to `sqrt'
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
In order to keep the GPU in a consistent state between samples, we have
to wait for it to fall asleep before proceeding.
For fun hook up igt_stats.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add forking subtests to gem_ringfill. Tests cause consistent GPU
hangs on SKL.
v2: Removed noop parts.
v3:
- Allow executing the tests in order too (Chris Wilson).
- Rename the tests to -forked-1
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[ickle: Extend to cover forked-N]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89959
gem_fenced_exec_thrash was not freeing any resources between
subtests. On 1Gb android systems this resulted in the test
failing with an OOM error.
Added cleanup code to free BOs at the end of each subtest.
Signed-off-by: Derek Morton <derek.j.morton@intel.com>
And they keep it disabled until something else enables it. So let's
consider this on the draw subtests.
With this, some PSR tests that were failing will now start passing.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Because the GTT mmaps "permanently" disable PSR and this can mess
some of our assertions. So let's just use the CPU domain to keep the
implementation simple.
With this, some PSR tests that were failing will now start passing.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It doesn't make sense to write on the sprite/cursor plane of the
"offscreen" screen. The pick_target() function was just returning the
offscreen_fb pointer for those cases, so we were not really testing
any cursor or sprite code. So the tests were just the same as
offscreen-pri.
That kills 24 subtests for each feature (72 in total).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
This test exercies the dev_priv->fb_tracking.busy_bits bug I recently
found and Daniel fixed.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It's simply a bit too scary on pre-gen6 and imo not worth the bother
really until someone starts to implement all the hacks an w/a required
on these platforms. On later platforms the issues are just with
correctness and performance hence no risk for hanging machines.
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
I often add new temoprary wait_user() calls when debugging things, and
having to add "if (opt.step)" is annoying, so let's make the step
level check inside wait_user(). As a bonus, our huge macro is 2 lines
shorter.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
And require sink CRC support for PSR, since the pipe CRC is not
exactly useful there.
v2: Check for ENOTTY (Rodrigo).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91019
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
On android platforms with 1Gb RAM gem_fence_thrash was failing
with an out of memory error.
This patch causes gem_close() to be called when a handle is
no longer required rather than relying on the cleanup when
the fd is closed. This greatly improves the memory footprint
of the test allowing it to run on 1Mb systems.
Also fixed a leak of the 'threads' variable.
v2: Simplified as per Chris Wilson's suggestion.
Signed-off-by: Derek Morton <derek.j.morton@intel.com>
[ickle: fix mmap leak from bo_copy()]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
A few entry points in the GEM API are expected to raise EIO if we
encounter a wedged GPU. This testcase aims to do so by first injecting a
GPU hang with GPU resets disabled (thus causing the GPU to become wedged)
and then exercises the various API to check for the expected errors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
testdisplay_hotplug.c: In function ‘hotplug_event’:
testdisplay_hotplug.c:46:14: error: storage size of ‘s’ isn’t known
struct stat s;
^
testdisplay_hotplug.c:54:2: error: implicit declaration of function ‘fstat’ [-Werror=implicit-function-declaration]
fstat(drm_fd, &s);
^
testdisplay_hotplug.c:54:2: warning: nested extern declaration of ‘fstat’ [-Wnested-externs]
testdisplay_hotplug.c:46:14: warning: unused variable ‘s’ [-Wunused-variable]
struct stat s;
^
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
v2: Try to open i915_pc8_status first to make the transition (or just
running on older kernels) better. (Paulo)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
This is a new test that should exercise the frontbuffer tracking
feature of the Kernel in a number of different ways. We use different
drawing methods, we use the primary, cursor and sprite planes, we can
test both on single and dual pipes, also on buffers not associated
with any CRTCs, etc.
We currently have assertions for both FBC and PSR, and we also have a
"nop" test mode that should disable both FBC and PSR, and can be
used for debugging.
This test is also capable of testing both FBC and PSR even if they are
disabled by default on the Kernel: the test knows how to change the
i915.ko parameters and then set them back after testing.
I am getting a significant number of failures when I run this test,
which means we have some work to do on the Kernel.
I also still have a small list of additional subtests that I plan to
add to this test, and those tests are documented on the main function.
v2:
- Use igt_debugfs_open() (Thomas).
- Use igt_test_description() (Thomas).
- Don't check drm_open_any_master()'s result (Thomas).
- Use igt_require_f() in some cases (Thomas).
- Standardize some assertions.
- Use the new module param functions.
- Check if FBC is supported by the chipset.
- Add new subtests (multidraw, enum fbs, fbc+psr).
- Make tests a little shorter.
- Reorganize which tests ara ran by default.
- Better comments everywhere.
- Rebase.
v3:
- Fix a small typo.
- Improve the log messages a little bit more.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
