Replace dolt and shave with using current autotools.

.gitignore

@@ -18,14 +18,10 @@ config.sub
 configure
 configure.lineno
 depcomp
-doltcompile
-doltlibtool
 install-sh
 libtool
 ltmain.sh
 missing
-shave
-shave-libtool
 stamp-h1
 cscope.*
 benchmarks/intel_upload_blit_large

Makefile.am

@@ -23,6 +23,3 @@ AUTOMAKE_OPTIONS = foreign
 ACLOCAL_AMFLAGS = -I m4
 
 SUBDIRS = lib man tests tools benchmarks
-DISTCLEANFILES = \
-	doltcompile \
-	doltlibtool

configure.ac

@@ -34,15 +34,9 @@ AM_INIT_AUTOMAKE([dist-bzip2])
 
 AM_MAINTAINER_MODE
 
-AC_CONFIG_FILES([
-	shave
-	shave-libtool
-])
-
 # Checks for programs.
 AC_DISABLE_STATIC
 AC_PROG_LIBTOOL
-DOLT
 AC_PROG_CC
 AM_PROG_CC_C_O
 
@@ -61,7 +55,9 @@ fi
 
 AC_SUBST([WARN_CFLAGS])
 
-SHAVE_INIT([.], [enable])
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.3 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.3)
+XORG_DEFAULT_OPTIONS
 
 AC_OUTPUT([
 	Makefile

m4/dolt.m4

@@ -1,178 +0,0 @@
-dnl dolt, a replacement for libtool
-dnl Copyright © 2007-2008 Josh Triplett <josh@freedesktop.org>
-dnl Copying and distribution of this file, with or without modification,
-dnl are permitted in any medium without royalty provided the copyright
-dnl notice and this notice are preserved.
-dnl
-dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
-dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
-dnl installed when running autoconf on your project.
-
-AC_DEFUN([DOLT], [
-AC_REQUIRE([AC_CANONICAL_HOST])
-# dolt, a replacement for libtool
-# Josh Triplett <josh@freedesktop.org>
-AC_PATH_PROG(DOLT_BASH, bash)
-AC_MSG_CHECKING([if dolt supports this host])
-dolt_supported=yes
-if test x$DOLT_BASH = x; then
-    dolt_supported=no
-fi
-if test x$GCC != xyes; then
-    dolt_supported=no
-fi
-case $host in
-i?86-*-linux*|x86_64-*-linux*|powerpc-*-linux* \
-|amd64-*-freebsd*|i?86-*-freebsd*|ia64-*-freebsd*)
-    pic_options='-fPIC'
-    ;;
-i?86-apple-darwin*)
-    pic_options='-fno-common'
-    ;;
-*)
-    dolt_supported=no
-    ;;
-esac
-if test x$dolt_supported = xno ; then
-    AC_MSG_RESULT([no, falling back to libtool])
-    LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
-    LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
-else
-    AC_MSG_RESULT([yes, replacing libtool])
-
-dnl Start writing out doltcompile.
-    cat <<__DOLTCOMPILE__EOF__ >doltcompile
-#!$DOLT_BASH
-__DOLTCOMPILE__EOF__
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-args=("$[]@")
-for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
-    if test x"${args@<:@$arg@:>@}" = x-o ; then
-        objarg=$((arg+1))
-        break
-    fi
-done
-if test x$objarg = x ; then
-    echo 'Error: no -o on compiler command line' 1>&2
-    exit 1
-fi
-lo="${args@<:@$objarg@:>@}"
-obj="${lo%.lo}"
-if test x"$lo" = x"$obj" ; then
-    echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
-    exit 1
-fi
-objbase="${obj##*/}"
-__DOLTCOMPILE__EOF__
-
-dnl Write out shared compilation code.
-    if test x$enable_shared = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-libobjdir="${obj%$objbase}.libs"
-if test ! -d "$libobjdir" ; then
-    mkdir_out="$(mkdir "$libobjdir" 2>&1)"
-    mkdir_ret=$?
-    if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
-	echo "$mkdir_out" 1>&2
-        exit $mkdir_ret
-    fi
-fi
-pic_object="$libobjdir/$objbase.o"
-args@<:@$objarg@:>@="$pic_object"
-__DOLTCOMPILE__EOF__
-    cat <<__DOLTCOMPILE__EOF__ >>doltcompile
-"\${args@<:@@@:>@}" $pic_options -DPIC || exit \$?
-__DOLTCOMPILE__EOF__
-    fi
-
-dnl Write out static compilation code.
-dnl Avoid duplicate compiler output if also building shared objects.
-    if test x$enable_static = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-non_pic_object="$obj.o"
-args@<:@$objarg@:>@="$non_pic_object"
-__DOLTCOMPILE__EOF__
-        if test x$enable_shared = xyes; then
-            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-"${args@<:@@@:>@}" >/dev/null 2>&1 || exit $?
-__DOLTCOMPILE__EOF__
-        else
-            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-"${args@<:@@@:>@}" || exit $?
-__DOLTCOMPILE__EOF__
-        fi
-    fi
-
-dnl Write out the code to write the .lo file.
-dnl The second line of the .lo file must match "^# Generated by .*libtool"
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-{
-echo "# $lo - a libtool object file"
-echo "# Generated by doltcompile, not libtool"
-__DOLTCOMPILE__EOF__
-
-    if test x$enable_shared = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo "pic_object='.libs/${objbase}.o'"
-__DOLTCOMPILE__EOF__
-    else
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo pic_object=none
-__DOLTCOMPILE__EOF__
-    fi
-
-    if test x$enable_static = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo "non_pic_object='${objbase}.o'"
-__DOLTCOMPILE__EOF__
-    else
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo non_pic_object=none
-__DOLTCOMPILE__EOF__
-    fi
-
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-} > "$lo"
-__DOLTCOMPILE__EOF__
-
-dnl Done writing out doltcompile; substitute it for libtool compilation.
-    chmod +x doltcompile
-    LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
-    LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
-
-dnl automake ignores LTCOMPILE and LTCXXCOMPILE when it has separate CFLAGS for
-dnl a target, so write out a libtool wrapper to handle that case.
-dnl Note that doltlibtool does not handle inferred tags or option arguments
-dnl without '=', because automake does not use them.
-    cat <<__DOLTLIBTOOL__EOF__ > doltlibtool
-#!$DOLT_BASH
-__DOLTLIBTOOL__EOF__
-    cat <<'__DOLTLIBTOOL__EOF__' >>doltlibtool
-top_builddir_slash="${0%%doltlibtool}"
-: ${top_builddir_slash:=./}
-args=()
-modeok=false
-tagok=false
-for arg in "$[]@"; do
-    case "$arg" in
-        --silent) ;;
-        --mode=compile) modeok=true ;;
-        --tag=CC|--tag=CXX) tagok=true ;;
-        *) args@<:@${#args[@]}@:>@="$arg" ;;
-    esac
-done
-if $modeok && $tagok ; then
-    . ${top_builddir_slash}doltcompile "${args@<:@@@:>@}"
-else
-    exec ${top_builddir_slash}libtool "$[]@"
-fi
-__DOLTLIBTOOL__EOF__
-
-dnl Done writing out doltlibtool; substitute it for libtool.
-    chmod +x doltlibtool
-    LIBTOOL='$(top_builddir)/doltlibtool'
-fi
-AC_SUBST(LTCOMPILE)
-AC_SUBST(LTCXXCOMPILE)
-# end dolt
-])

m4/shave.m4

@@ -1,73 +0,0 @@
-dnl Make automake/libtool output more friendly to humans
-dnl
-dnl SHAVE_INIT([shavedir],[default_mode])
-dnl
-dnl shavedir: the directory where the shave scripts are, it defaults to
-dnl           $(top_builddir)
-dnl default_mode: (enable|disable) default shave mode.  This parameter
-dnl               controls shave's behaviour when no option has been
-dnl               given to configure.  It defaults to disable.
-dnl
-dnl * SHAVE_INIT should be called late in your configure.(ac|in) file (just
-dnl   before AC_CONFIG_FILE/AC_OUTPUT is perfect.  This macro rewrites CC and
-dnl   LIBTOOL, you don't want the configure tests to have these variables
-dnl   re-defined.
-dnl * This macro requires GNU make's -s option.
-
-AC_DEFUN([_SHAVE_ARG_ENABLE],
-[
-  AC_ARG_ENABLE([shave],
-    AS_HELP_STRING(
-      [--enable-shave],
-      [use shave to make the build pretty [[default=$1]]]),,
-      [enable_shave=$1]
-    )
-])
-
-AC_DEFUN([SHAVE_INIT],
-[
-  dnl you can tweak the default value of enable_shave
-  m4_if([$2], [enable], [_SHAVE_ARG_ENABLE(yes)], [_SHAVE_ARG_ENABLE(no)])
-
-  if test x"$enable_shave" = xyes; then
-    dnl where can we find the shave scripts?
-    m4_if([$1],,
-      [shavedir="$ac_pwd"],
-      [shavedir="$ac_pwd/$1"])
-    AC_SUBST(shavedir)
-
-    dnl make is now quiet
-    AC_SUBST([MAKEFLAGS], [-s])
-    AC_SUBST([AM_MAKEFLAGS], ['`test -z $V && echo -s`'])
-
-    dnl we need sed
-    AC_CHECK_PROG(SED,sed,sed,false)
-
-    dnl substitute libtool
-    SHAVE_SAVED_LIBTOOL=$LIBTOOL
-    LIBTOOL="${SHELL} ${shavedir}/shave-libtool '${SHAVE_SAVED_LIBTOOL}'"
-    AC_SUBST(LIBTOOL)
-
-    dnl substitute cc/cxx
-    SHAVE_SAVED_CC=$CC
-    SHAVE_SAVED_CXX=$CXX
-    SHAVE_SAVED_FC=$FC
-    SHAVE_SAVED_F77=$F77
-    CC="${SHELL} ${shavedir}/shave cc ${SHAVE_SAVED_CC}"
-    CXX="${SHELL} ${shavedir}/shave cxx ${SHAVE_SAVED_CXX}"
-    FC="${SHELL} ${shavedir}/shave fc ${SHAVE_SAVED_FC}"
-    F77="${SHELL} ${shavedir}/shave f77 ${SHAVE_SAVED_F77}"
-    AC_SUBST(CC)
-    AC_SUBST(CXX)
-    AC_SUBST(FC)
-    AC_SUBST(F77)
-
-    V=@
-  else
-    V=1
-  fi
-  Q='$(V:1=)'
-  AC_SUBST(V)
-  AC_SUBST(Q)
-])
-

shave-libtool.in

@@ -1,69 +0,0 @@
-#!/bin/sh
-
-# we need sed
-SED=@SED@
-if test -z "$SED" ; then
-SED=sed
-fi
-
-lt_unmangle ()
-{
-   last_result=`echo $1 | $SED -e 's#.libs/##' -e 's#[0-9a-zA-Z_\-\.]*_la-##'`
-}
-
-# the real libtool to use
-LIBTOOL="$1"
-shift
-
-# if 1, don't print anything, the underlaying wrapper will do it
-pass_though=0
-
-# scan the arguments, keep the right ones for libtool, and discover the mode
-preserved_args=
-while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-    --mode=*)
-        mode=`echo $opt | $SED -e 's/[-_a-zA-Z0-9]*=//'`
-        preserved_args="$preserved_args $opt"
-        ;;
-    -o)
-        lt_output="$1"
-        preserved_args="$preserved_args $opt"
-	;;
-    *)
-        preserved_args="$preserved_args $opt"
-        ;;
-      esac
-done
-
-case "$mode" in
-compile)
-    # shave will be called and print the actual CC/CXX/LINK line
-    preserved_args="$preserved_args --shave-mode=$mode"
-    pass_though=1
-    ;;
-link)
-    preserved_args="$preserved_args --shave-mode=$mode"
-    Q="  LINK  "
-    ;;
-*)
-    # let's u
-    # echo "*** libtool: Unimplemented mode: $mode, fill a bug report"
-    ;;
-esac
-
-lt_unmangle "$lt_output"
-output=$last_result
-
-if test -z $V; then
-    if test $pass_though -eq 0; then
-        echo "$Q$output"
-    fi
-    $LIBTOOL --silent $preserved_args
-else
-    echo $LIBTOOL $preserved_args
-    $LIBTOOL $preserved_args
-fi

shave.in

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-# we need sed
-SED=@SED@
-if test -z "$SED" ; then
-SED=sed
-fi
-
-lt_unmangle ()
-{
-   last_result=`echo $1 | $SED -e 's#.libs/##' -e 's#[0-9a-zA-Z_\-\.]*_la-##'`
-}
-
-# the tool to wrap (cc, cxx, ar, ranlib, ..)
-tool="$1"
-shift
-
-# the reel tool (to call)
-REEL_TOOL="$1"
-shift
-
-pass_through=0
-preserved_args=
-while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-    --shave-mode=*)
-        mode=`echo $opt | $SED -e 's/[-_a-zA-Z0-9]*=//'`
-	;;
-    -o)
-        lt_output="$1"
-        preserved_args="$preserved_args $opt"
-	;;
-    *)
-        preserved_args="$preserved_args $opt"
-        ;;
-      esac
-done
-
-# mode=link is handled in the libtool wrapper
-case "$mode,$tool" in
-link,*)
-    pass_through=1
-    ;;
-*,cxx)
-    Q="  CXX   "
-    ;;
-*,cc)
-    Q="  CC    "
-    ;;
-*,fc)
-    Q="  FC    "
-    ;;
-*,f77)
-    Q="  F77   "
-    ;;
-*,*)
-    # should not happen
-    Q="  CC    "
-    ;;
-esac
-
-lt_unmangle "$lt_output"
-output=$last_result
-
-if test -z $V; then
-    if test $pass_through -eq 0; then
-        echo "$Q$output"
-    fi
-    $REEL_TOOL $preserved_args
-else
-    echo $REEL_TOOL $preserved_args
-    $REEL_TOOL $preserved_args
-fi