flywithu/debugging
1
0
Fork 0
mirror of https://github.com/ioacademy-jikim/debugging synced 2025-06-08 00:16:11 +00:00
Code Issues Releases Wiki Activity
debugging/02_day/valgrind/valgrind-3.11.0/docs/internals/xml-output-protocol4.txt
jikim 0b589c7986 first commit
2015-12-13 22:34:58 +09:00

746 lines
22 KiB
Plaintext
Raw Permalink Blame History

====================================================================
14 October 2011
Protocols 1 through 3 supported Memcheck only. Protocol 4 provides
XML output for Memcheck, Helgrind, DRD and SGcheck. Technically there
are four variants of Protocol 4, one for each tool, since they
produce different errors. The four variants differ only in the
definition of the ERROR nonterminal and are otherwise identical.
NOTE that Protocol 4 (for the current svn trunk, which will eventually
become 3.7.x) is still under development. The text herein should not
be regarded as the final definition.
Identification of Protocols
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In Protocols 1 through 3, a <protocolversion>INT<protocolversion>
close to the start of the stream makes it possible for parsers to
ascertain the version, so they can tell whether or not they can handle
it. The presence of support for multiple tools brings a complication,
though: it is not enough merely to state the protocol version -- the
tool name must also be stated. Hence in Protocol 4, the
<protocolversion>INT<protocolversion> is followed immediately by
<protocoltool>TEXT</protocoltool>, to identify the tool.
This duplicates the tool name present later in the preamble, but it
was felt important to place the tool name right at the front along
with the protocol number, for easy determination of parseability.
How this specification is structured
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The TOPLEVEL nonterminal specifies top level XML output structure. It
is common to all error producing tools.
TOPLEVEL references TOOLSPECIFICs for each tool, and these are defined
differently for each tool. Each TOOLSPECIFIC is an error, which is
tool-specific. For Helgrind and DRD, a TOOLSPECIFIC may also contain a
so-called thread-announcement record (described below).
Overall there is a very high degree of format commonality between the
three tools. Once a GUI is able to display the output correctly for
one tool, it should be easy to extend it for the other two.
Protocol 4 changes for Memcheck
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Protocol 4 for Memcheck is similar to Protocol 3, but has a number
of changes to make it fit in the common framework:
- the SUPPCOUNTS nonterminal now appears after the "Zero or more
ERRORs" block, and not before it.
- the abovementioned "Zero or more ERRORs" block now becomes
"Zero or more of (either ERROR or ERRORCOUNTS)".
- ERRORs for Memcheck may contain a SUPPRESSION field, which gives
the corresponding suppression for it.
- ERRORs for Memcheck now use the XWHAT and XAUXWHAT nonterminals, as
well as WHAT and XWHAT.
- The ad-hoc blocks <leakedbytes> and <leakedblocks> used by Memcheck
have been moved inside the XWHAT for the relevant error kinds. This
facilitates a common definition of ERROR across all three tools.
The first two changes are required in order to correct a longstanding
design flaw in the way Memcheck interacts with Valgrind's error
management mechanism. See bug #186790
(https://bugs.kde.org/show_bug.cgi?id=186790). The third change was
requested in #191189 (https://bugs.kde.org/show_bug.cgi?id=191189).
For GUI authors upgrading from Protocol 3 or earlier, the most
significant new concept to grasp is the relationship between WHAT and
XWHAT, and between AUXWHAT and XAUXWHAT.
The definition of Protocol 4 now follows. It is structured similarly
to that of the previous protocols, except that there is a separate
definition of a nonterminal called TOOLSPECIFIC for each of Memcheck,
Helgrind, DRD and SGcheck. The XWHAT and XAUXWHAT nonterminals also
have tool-specific components. Apart from that, the structure is
common to all supported tools.
====================================================================
TOPLEVEL
--------
The first line output is always this:
<?xml version="1.0"?>
All remaining output is contained within the tag-pair
<valgrindoutput>.
Inside that, the first entity is an indication of the protocol
version. This is provided so that existing parsers can identify XML
created by future versions of Valgrind merely by observing that the
protocol version is one they don't understand. Hence TOPLEVEL is:
<?xml version="1.0"?>
<valgrindoutput>
<protocolversion>INT<protocolversion>
<protocoltool>TEXT</protocoltool>
PROTOCOL
</valgrindoutput>
Valgrind versions 3.0.0 and 3.0.1 emit protocol version 1. Versions
3.1.X and 3.2.X [and 3.3.X ??] emit protocol version 2. 3.4.X emits
protocol version 3. 3.5.X emits version 4.
The TEXT in <protocoltool> is either "memcheck", "helgrind", "drd" or
"exp-ptrcheck" and determines the allowed format of the ERROR
nonterminal. Note that <protocoltool> is only present when the
protocol version is 4 or above.
PROTOCOL for version 4
----------------------
This is the main top-level construction. Roughly speaking, it
contains a preamble, a program-started marker, the errors from the run
of the program, a program-ended marker, and any further errors
resulting from post-run analysis (eg, memory leak detection). Hence
the following in sequence:
* Various preamble lines which give version info for the various
components. The text in them can be anything; it is not intended
for interpretation by the GUI:
<preamble>
<line>Misc version/copyright text</line> (zero or more of)
</preamble>
* The PID of this process and of its parent:
<pid>INT</pid>
<ppid>INT</ppid>
* The name of the tool being used:
<tool>TEXT</tool>
This can be anything, and it doesn't have to match the
<protocoltool> entry, although that might be wise.
* Zero or more bindings of environment variable names to actual
values. These describe precisely the instantiations of %q format
specifiers used in the --xml-file= argument for the run, if any.
There is one <logfilequalifier> entry for each %q expanded:
<logfilequalifier> <var>VAR</var> <value>$VAR</value>
</logfilequalifier>
* OPTIONALLY, if --xml-user-comment=STRING was given:
<usercomment>STRING</usercomment>
STRING is not escaped in any way, so that it itself may be a piece
of XML with arbitrary tags etc.
* The program and args: first those pertaining to Valgrind itself, and
then those pertaining to the program to be run under Valgrind (the
client):
<args>
<vargv>
<exe>TEXT</exe>
<arg>TEXT</arg> (zero or more of)
</vargv>
<argv>
<exe>TEXT</exe>
<arg>TEXT</arg> (zero or more of)
</argv>
</args>
* The following, indicating that the program has now started:
<status> <state>RUNNING</state>
<time>human-readable-time-string</time>
</status>
The format of this string is not defined, but it is expected to be
human-understandable. In current Valgrind versions it is the
elapsed wallclock time since process start.
* Zero or more of (either ERRORCOUNTS, TOOLSPECIFIC, or CLIENTMSG).
* The following, indicating that the program has now finished, and
that the any final wrapup (eg, for Memcheck, leak checking) is happening.
<status> <state>FINISHED</state>
<time>human-readable-time-string</time>
</status>
* Zero or more of (either ERRORCOUNTS or TOOLSPECIFIC). In Memcheck's
case these will be complaints from the leak checker. For SGcheck
and Helgrind we don't expect any output here (but the spec does not
guarantee that either).
* SUPPCOUNTS, indicating how many times each suppression was used.
That's it. The tool-specific definitions for TOOLSPECIFIC are below;
however let's first continue with some smaller nonterminals used in
the construction of errors for all the tool types.
====================================================================
Nonterminals used in construction of ERRORs
-------------------------------------------
STACK
-----
STACK indicates locations in the program being debugged. A STACK
is one or more FRAMEs. The first is the innermost frame, the
next its caller, etc.
<stack>
one or more FRAME
</stack>
FRAME
-----
FRAME records a single program location:
<frame>
<ip>HEX64</ip>
optionally <obj>TEXT</obj>
optionally <fn>TEXT</fn>
optionally <dir>TEXT</dir>
optionally <file>TEXT</file>
optionally <line>INT</line>
</frame>
Only the <ip> field is guaranteed to be present. It indicates a
code ("instruction pointer") address.
The optional fields, if present, appear in the order stated:
* obj: gives the name of the ELF object containing the code address
* fn: gives the name of the function containing the code address
* dir: gives the source directory associated with the name specified
by <file>. Note the current implementation often does not
put anything useful in this field.
* file: gives the name of the source file containing the code address
* line: gives the line number in the source file
ERRORCOUNTS
-----------
This specifies, for each error that has been so far presented,
the number of occurrences of that error.
<errorcounts>
zero or more of
<pair> <count>INT</count> <unique>HEX64</unique> </pair>
</errorcounts>
Each <pair> gives the current error count <count> for the error with
unique tag </unique>. The counts do not have to give a count for each
error so far presented - partial information is allowable.
As at Valgrind rev 3793, error counts are only emitted at program
termination. However, it is perfectly acceptable to periodically emit
error counts as the program is running. Doing so would facilitate a
GUI to dynamically update its error-count display as the program runs.
SUPPCOUNTS
----------
A SUPPCOUNTS block appears exactly once, after the program terminates.
It specifies the number of times each error-suppression was used.
Suppressions not mentioned were used zero times.
<suppcounts>
zero or more of
<pair> <count>INT</count> <name>TEXT</name> </pair>
</suppcounts>
The <name> is as specified in the suppression name fields in .supp
files.
SUPPRESSION
-----------
These are optionally emitted as part of ERRORs, and specify the
suppression that would be needed to suppress the containing error.
For convenience, the suppression is presented twice, once in
a structured nicely wrapped up in tags, and once as raw text
suitable for direct copying and pasting into a suppressions file.
<suppression>
<sname>TEXT</sname> name of the suppression
<skind>TEXT</skind> kind, eg "Memcheck:Param"
<skaux>TEXT</skaux> (optional) aux kind, eg "write(buf)"
SFRAME (one or more) frames
<rawtext> CDATAS </rawtext>
</suppression>
where CDATAS is a sequence of one or more <![CDATA[ .. ]]> blocks
holding the raw text. Unfortunately, CDATA provides no way to escape
the ending marker "]]>", which means that if the raw data contains
such a sequence, it has to be split between two CDATA blocks, one
ending with data "]]" and the other beginning with data "<". This is
why the spec calls for one or more CDATA blocks rather than exactly
one.
Note that, so far, we cannot envisage a circumstance in which a
generated suppression would contain the string "]]>", since neither
"]" nor ">" appear to turn up in mangled symbol names. Hence it is
not envisaged that there will ever be more than one CDATA block, and
indeed the implementation as of Valgrind 3.5.0 will only ever generate
one block (it ignores any possible escaping problems). Nevertheless
the specification allows multiple blocks, as a matter of safety.
SFRAME
------
Either
<sframe> <obj>TEXT</obj> </sframe>
eg denoting "obj:/usr/X11R6/lib*/libX11.so.6.2", or
<sframe> <fun>TEXT</fun> </sframe>
eg denoting "fun:*libc_write"
WHAT and XWHAT
--------------
WHAT supplies a single line of text, which is a human-understandable,
primary description of an error.
XWHAT is an extended version of WHAT. It also contains a piece of
text intended for human reading, but in addition may contain arbitrary
other tagged data. This extra data is tool-specific. One of its
purposes is to supply GUIs with links to other data in the sequence of
TOOLSPECIFICs, that are associated with the error. Another purpose is
wrap certain quantities (numbers, file names, etc) embedded in the
message, so that the GUIs can get hold of them without having to parse
the text itself.
For example, we could get:
<what>Possible data race on address 0x12345678</what>
or alternatively
<xwhat>
<text>Possible data race by thread #17 on address 0x12345678</text>
<threadid>17</threadid>
</xwhat>
And presumably the <threadid>17</threadid> refers to some previously
emitted entity in the stream of TOOLSPECIFICs for this tool.
In an XWHAT, the <text> tag-pair is mandatory. GUIs which don't want
to handle the extra fields can just ignore them and display the text
part. In this way they have the option to present at least something
useful to the user even in the case where the extra fields can't be
handled, for whatever reason.
A corollary of this is that the degenerate extended case
<xwhat> <text>T</text> </xwhat>
is exactly equivalent to
<what>T</what>
AUXWHAT and XAUXWHAT
--------------------
AUXWHAT is exactly like WHAT: a single line of text. It provides
additional, secondary description of an error, that should be shown to
the user.
XAUXWHAT relates to AUXWHAT in the same way XWHAT relates to WHAT: it
wraps up extra tagged info along with the line of text that would be
in the AUXWHAT.
====================================================================
ERROR definition -- common structure
------------------------------------
ERROR defines an error, and is the most complex nonterminal. For all
of the tools, the structure is common, and always conforms to the
following:
<error>
<unique>HEX64</unique>
<tid>INT</tid>
<threadname>NAME</threadname> if set
<kind>KIND</kind>
(either WHAT or XWHAT)
optionally: (either WHAT or XWHAT)
STACK
zero or more: (either AUXWHAT or XAUXWHAT or STACK)
optionally: SUPPRESSION
</error>
* Each error contains a unique, arbitrary 64-bit hex number. This is
used to refer to the error in ERRORCOUNTS nonterminals (see above).
* The <tid> tag indicates the Valgrind thread number. This value
is arbitrary but may be used to determine which threads produced
which errors (at least, the first instance of each error).
* The <threadname> tag identifies the name of the thread if it was
set by the client application. If no name was set, the tag is
omitted.
* The <kind> tag specifies one of a small number of fixed error types,
so that GUIs may roughly categorise errors by type if they want.
The tags themselves are tool-specific and are defined further
below, for each tool.
* The "(either WHAT or XWHAT)" gives a primary description of the
error. WHAT and XWHAT are defined earlier in this file. Any XWHATs
appearing here may contain tool-specific subcomponents.
* Optionally, a second line of primary description may be present.
* A STACK gives the primary source location for the error.
* There then follow zero or more of "(either AUXWHAT or XAUXWHAT or
STACK)". These give further (auxiliary) information about the
error, possibly including stack traces. They should be shown to the
user in the order they appear. AUXWHAT and XAUXWHAT are defined
earlier in this file. Any XAUXWHATs appearing here may contain
tool-specific subcomponents.
* Optionally, as the last field, a SUPPRESSION may be provided. This
contains a suppression that would hide the error.
====================================================================
TOOLSPECIFIC definition for Memcheck
------------------------------------
For Memcheck, a TOOLSPECIFIC is simply an ERROR:
TOOLSPECIFIC = ERROR
ERROR details for Memcheck
--------------------------
XWHATs (for definition, see above) may contain the following extra
components (along with the mandatory <text>...</text> component):
* <leakedbytes>INT</leakedbytes>
* <leakedblocks>INT</leakedblocks>
These fields are used in errors that have a <kind> tag specifying a
KIND of the form "Leak_*", to indicate the number of leaked bytes and
blocks.
XAUXWHATs (for definition, see above) may contain the following extra
components (along with the mandatory <text>...</text> component):
* <file>TEXT</file>, as defined in FRAME
* <line>INT</line>, as defined in FRAME
* <dir>TEXT</dir>, as defined in FRAME
KIND for Memcheck
-----------------
This is a small enumeration indicating roughly the nature of an error.
The possible values are:
InvalidFree
free/delete/delete[] on an invalid pointer
MismatchedFree
free/delete/delete[] does not match allocation function
(eg doing new[] then free on the result)
InvalidRead
read of an invalid address
InvalidWrite
write of an invalid address
InvalidJump
jump to an invalid address
Overlap
args overlap other otherwise bogus in eg memcpy
InvalidMemPool
invalid mem pool specified in client request
UninitCondition
conditional jump/move depends on undefined value
UninitValue
other use of undefined value (primarily memory addresses)
SyscallParam
system call params are undefined or point to
undefined/unaddressible memory
ClientCheck
"error" resulting from a client check request
Leak_DefinitelyLost
memory leak; the referenced blocks are definitely lost
Leak_IndirectlyLost
memory leak; the referenced blocks are lost because all pointers
to them are also in leaked blocks
Leak_PossiblyLost
memory leak; only interior pointers to referenced blocks were
found
Leak_StillReachable
memory leak; pointers to un-freed blocks are still available
====================================================================
TOOLSPECIFIC definition for SGcheck
-----------------------------------
For SGcheck, a TOOLSPECIFIC is simply an ERROR:
TOOLSPECIFIC = ERROR
ERROR details for SGcheck
-------------------------
SGcheck does not produce any XWHAT records, despite the fact that
"ERROR definition -- common structure" says that tools may do so.
XAUXWHATs (for definition, see above) may contain the following extra
components (along with the mandatory <text>...</text> component):
* <file>TEXT</file>, as defined in FRAME
* <line>INT</line>, as defined in FRAME
* <dir>TEXT</dir>, as defined in FRAME
KIND for SGcheck
----------------
This is a small enumeration indicating roughly the nature of an error.
The possible values are:
SorG
Stack or global array inconsistency (roughly speaking, an
overrun of a stack or global array). The <auxwhat> blocks give
further details.
====================================================================
TOOLSPECIFIC definition for Helgrind
-------------------------------------
For Helgrind, a TOOLSPECIFIC may be one of two things:
TOOLSPECIFIC = either ERROR or ANNOUNCETHREAD
ANNOUNCETHREAD
--------------
The definition is
<announcethread>
<hthreadid>INT</hthreadid>
STACK
</announcethread>
This states the creation point of a thread, and gives it a unique
"hthreadid", which may be referred to in subsequent ERRORs. Note that
1. The appearance of ANNOUNCETHREAD does not mean that the thread was
actually created at that point relative to any preceding or
following ERRORs in the output stream -- in general the thread will
have been created arbitrarily earlier. Helgrind only "announces" a
thread when it needs to refer to it for the first time, in a
subsequent ERROR.
2. The "hthreadid" is a number which uniquely identifies the thread
for the run - no other thread will have the same hthreadid. The
hthreadid is a Helgrind-specific piece of information and is
unrelated to the <tid> fields in the common part of an ERROR.
Be careful not to confuse the two.
ERROR details for Helgrind
--------------------------
XWHATs (for definition, see above) may contain the following extra
components (along with the mandatory <text>...</text> component):
* <hthreadid>INT</hthreadid> fields. These refer to ANNOUNCETHREADs
appearing previously in the scheme, and state the creation points of
the thread(s) concerned in the ERROR. Hence it should be possible
for GUIs to show users stacks of the creation points of all threads
involved in each ERROR.
XAUXWHATs (for definition, see above) may contain the following extra
components (along with the mandatory <text>...</text> component):
* <hthreadid>INT</hthreadid>, same meaning as when referred to in
XWHAT
* <file>TEXT</file>, as defined in FRAME
* <line>INT</line>, as defined in FRAME
* <dir>TEXT</dir>, as defined in FRAME
KIND for Helgrind
-----------------
This is a small enumeration indicating roughly the nature of an error.
The possible values are:
Race
Data race. Helgrind will try to show the stacks for both
conflicting accesses if it can; it will always show the stack
for at least one of them.
UnlockUnlocked
Unlocking a not-locked lock
UnlockForeign
Unlocking a lock held by some other thread
UnlockBogus
Unlocking an address which is not known to be a lock
PthAPIerror
One of the POSIX pthread_ functions that are intercepted
by Helgrind, failed with an error code. Usually indicates
something bad happening.
LockOrder
An inconsistency in the acquisition order of locks was observed;
dangerous, as it can potentially lead to deadlocks
Misc
One of various miscellaneous noteworthy conditions was observed
(eg, thread exited whilst holding locks, "impossible" behaviour
from the underlying threading library, etc)
====================================================================
CLIENTMSG
CLIENTMSG defines a message that was caused by one of the following
client requests:
- VALGRIND_PRINTF
- VALGRIND_PRINTF_BACKTRACE
Definition:
<clientmsg>
<tid>INT</tid>
<threadname>NAME</threadname> if set
<text>...</text>
</clientmsg>
OR
<clientmsg>
<tid>INT</tid>
<threadname>NAME</threadname> if set
<text>...</text>
STACK
</clientmsg>
* The <tid> tag indicates the Valgrind thread number.
* The <threadname> tag identifies the name of the thread if it was
set by the client application. If no name was set, the tag is
omitted.
* The <text> tag indicates the message as specified in the client request
(properly translated to XML).
* STACK is only present in case of VALGRIND_PRINTF_BACKTRACE. See above
for a definition of STACK.
Reference in New Issue View Git Blame Copy Permalink