Fix deafen semantics

src/avclan/bus.cc

@@ -120,7 +120,10 @@ void Bus::mute(bool mute) {
   phy_mute(mute);
   muted_ = mute; // Only update muted_ *AFTER* hardware has finished muting
 };
-void Bus::deafen(bool deaf) { deafened_ = deaf; }
+void Bus::deafen(bool deaf) {
+  phy_deafen(deaf);
+  deafened_ = deaf; // Only update deafened_ *AFTER* the phy has stopped acking
+}
 
 auto Bus::read(Frame::Print print)
     -> expected<std::unique_ptr<Frame>, Error::Read> {

src/avclan/bus.hpp

@@ -81,7 +81,8 @@ public:
   void mute(bool mute);
   bool is_muted() const { return muted_; };
 
-  // Set the device to be deaf to (ie ignore) bus activity
+  // Set the device to be deaf to (ie don't react to) bus activity. It is
+  // orthogonal to mute — a deaf device can still send frames.
   void deafen(bool deaf);
 
 #ifndef NDEBUG

src/avclan/hal/phy.h

@@ -30,6 +30,11 @@ void phy_mute(bool mute);
 // Non-mutating (e.g. theoretically const qualified/-able)
 bool phy_is_muted(void);
 
+// Withhold acknowledgement. Unlike mute this leaves TX alone: a deaf device
+// can still manipulate the bus/send frames, it just never responds (e.g. ACK,
+// etc). An empty implementation is sufficient for synchronous ports.
+void phy_deafen(bool deaf);
+
 // True when there is a frame to read. This may reflect current bus state (e.g.
 // a frame can be synchronously read from the bus) or indicate that a buffered
 // frame is available to "read".
@@ -93,6 +98,7 @@ Send phy_send_done(uint8_t *data_index);
 
 #ifndef NDEBUG
 
+// Hold the bus at a level until the matching call.
 void phy_set_dominant(void);
 void phy_set_recessive(void);
 

src/avclan/target/avr-attiny3216/phy_avr.c

@@ -83,6 +83,10 @@ bool phy_is_muted() {
   return (((VPORTA_DIR & PIN4_bm) | (VPORTA_DIR & PIN0_bm)) == 0);
 }
 
+// No-op: acks are driven from inside the synchronous read path, which a deaf
+// caller never enters.
+void phy_deafen([[maybe_unused]] bool deaf) {}
+
 // True when the bus is being driven (i.e. not idle/floating).
 bool phy_frame_pending() { return (!BUS_IS_IDLE) != 0; }
 
@@ -621,8 +625,22 @@ void phy_guard_leave() {
 
 #ifndef NDEBUG
 
-void phy_set_dominant(void) { AVCLAN_setBusDriven(); }
-void phy_set_recessive(void) { AVCLAN_setBusIdle(); }
+// Hold the bus at a given level.
+// Overrides and restores mute state upon release (i.e. set recessive).
+static void phy_set_state(bool dominant) {
+  static bool saved_mute = false;
+  if (dominant) {
+    saved_mute = phy_is_muted();
+    AVCLAN_setBusDriven();
+    phy_mute(false);
+  } else {
+    AVCLAN_setBusIdle();
+    phy_mute(saved_mute);
+  }
+}
+
+void phy_set_dominant(void) { phy_set_state(true); }
+void phy_set_recessive(void) { phy_set_state(false); }
 
   #ifdef MEASURE_BUS
     #include <stdio.h> // phy_measure() reporting (debug builds only)

src/avclan/target/pico2/phy.cc

@@ -154,6 +154,11 @@ public:
     sync_ack_arming();
   }
 
+  void deafen(bool deaf) {
+    deafened_ = deaf;
+    sync_ack_arming();
+  }
+
   // Disarm RX ACK'ing behavior; called prior to frame TX to prevent
   // self-ACK'ing. Safe to rearm any time after sending controller addr.
   void disarm_ack() {
@@ -310,7 +315,7 @@ private:
   // Disarming inverts the Y register (self address + parity), which leaves the
   // upper 19 bits set and so prevents any read from matching.
   void sync_ack_arming() {
-    const bool arm = !muted_ && !transmitting_;
+    const bool arm = !muted_ && !deafened_ && !transmitting_;
     if (arm == ack_armed_)
       return;
     pio_sm_exec_wait_blocking(pio_, sm_, pio_encode_mov_not(pio_y, pio_y));
@@ -378,6 +383,7 @@ private:
 
   bool ack_armed_ = false; // hardware: y holds self_addrp_, or its complement
   bool muted_ = false;     // we don't answer on the bus
+  bool deafened_ = false;  // we don't answer, but may still transmit
   bool transmitting_ = false; // our own frame is on the wire
 
   std::array<RxFrame, RXQ_N> rxq_ = {};
@@ -431,6 +437,7 @@ public:
   // Claims and configures both SMs, but doesn't start them.
   void init(PIO pio, uint pin_rx, uint pin_tx) {
     pio_ = pio;
+    pin_tx_ = pin_tx;
     tx_offset_ = (uint)pio_add_program(pio_, &iebus_tx_program);
     ack_offset_ = (uint)pio_add_program(pio_, &iebus_ack_program);
     tx_sm_ = (uint)pio_claim_unused_sm(pio_, true);
@@ -474,6 +481,23 @@ public:
 
   bool is_muted() const { return muted_; }
 
+  // Hold the bus at a given level.
+  // Overrides and restores mute state upon release (i.e. set recessive).
+  void set_state(bool dominant) {
+    static bool saved_mute = false;
+    if (dominant) {
+      saved_mute = muted_;
+      mute(true);
+      pio_sm_set_pins_with_mask(pio_, tx_sm_, 0U, 1U << pin_tx_);
+    } else {
+      pio_sm_set_pins_with_mask(pio_, tx_sm_, 1U << pin_tx_, 1U << pin_tx_);
+      // The ack SM parks on `wait 1 irq`, which consumes a flag raised while it
+      // was down and drives the slot immediately -- Phy::mute's ordering.
+      pio_interrupt_clear(pio_, ack_irq);
+      mute(saved_mute);
+    }
+  }
+
   // Send start and broadcast bits.
   Send send_header(bool is_unicast) {
     if (muted_)
@@ -624,6 +648,7 @@ private:
   IEBusRx &rx_;
 
   PIO pio_;
+  uint pin_tx_;
   uint tx_sm_;
   uint tx_offset_;
   uint ack_sm_;
@@ -768,6 +793,8 @@ extern "C" void phy_mute(bool mute) { phy.mute(mute); }
 
 extern "C" bool phy_is_muted() { return phy.is_muted(); }
 
+extern "C" void phy_deafen(bool deaf) { phy.rx().deafen(deaf); }
+
 extern "C" bool phy_frame_pending() { return phy.rx().frame_pending(); }
 
 extern "C" void phy_guard_enter() {}
@@ -852,8 +879,8 @@ extern "C" Send phy_send_done(uint8_t *data_index) {
 
 #ifndef NDEBUG
 
-void phy_set_dominant() {}
-void phy_set_recessive() {}
+extern "C" void phy_set_dominant() { phy.tx().set_state(true); }
+extern "C" void phy_set_recessive() { phy.tx().set_state(false); }
 
   #ifdef MEASURE_BUS
 // Sample and dump bus bit timing over the serial link (REPL `M`).