# 6.1: Sending a Transaction with a Multisig

> **NOTE:** This is a draft in progress, so that I can get some feedback from early reviewers. It is not yet ready for learning.

The first way to vary how you send a basic transaction is to use a multisig. This gives you the ability to require that multiple people (or at least multiple private keys) authorize the use of funds.

## Understand How Multisigs Work

For a typical P2PKH transaction, bitcoins are sent to an address based on your public key, which in turn means that the related private key is required to unlock the transaction, solving the cryptographic puzzle and allowing you to reuse the funds. But what if you could instead lock a transaction with _multiple_ private keys. This would effectively allow keys to be sent to a group of people, where that group of people all has to agree to reuse the funds. 

_What is a multisignature?_ A multisignature is simply a methodology that allows more than one person to jointly create a digital signature. It's a general technique for the cryptographic use of keys that goes far beyond Bitcoin.

_What is a multisignature transaction?_ A multisignature transaction is a Bitcoin transaction that requires the signatures of multiple people to reuse the funds.

Simple multisignatures just require everyone in a group to sign a transaction. However, there's more possible complexity than that. Multisignatures are generally described as being "m of n". That means that the transaction is locked with a group of "n" keys, but only "m" of them are required to unlock the transaction. 

_What is a m-of-n multisignature?_ A multisignature where "m" signatures out of a group of "n" are required to form the signature and "m ≤ n".

Technically, a multisignature is created by Bitcoin with the OP_CHECKMULTISIG command, and typically that's encapsulated in a P2SH address. Chapter 8 will detail how that works more precisely. For now, all you need to know is that you can use `bitcoin-cli` command to create multisignature addresses that can be mailed to just like any normal address, but which will require multiple private keys for redemption.

## Create a Multisig Address

In order to receive funds through a multisignature address, you must create a multisignature address. This example shows the creation of a 2-of-2 multisignature.

### Create the Addresses

The first step is to have each of the recipients for the multisignature address contribute their own address. 

This means that they'll each run the `getnewaddress` command on their own machine:
```
machine1$ address1=$(bitcoin-cli getnewaddress)
```
And:
```
machine2$ address2=$(bitcoin-cli getnewaddress)
```
Afterwards, one of the recipients (or perhaps some third party) will need to collect the signatures. 

#### Collect Remote Public Keys

But, there's a catch! You might recall that a Bitcoin address is actually the hash of a public key, not the public key itself. But, you need the full public key to create a multisignature! For any addresses created on your machine, no problem. The full public key (and the private key for that matter) is sitting in your wallet, so `bitcoin-cli` will be able to access them. But for any addresses created on remote machines, you'll need more.

The remote user must look up the complete information on his address and send you the associated public key. This can be done with the `validateaddress` command.
```
machine2$ bitcoin-cli -named validateaddress address=$address2
{
  "isvalid": true,
  "address": "mfduLxpR6Bq1ARctV2TauhetWwqnqH1vYS",
  "scriptPubKey": "76a9140150730730b1b681a7757f1188322dcb31d8ddbd88ac",
  "ismine": true,
  "iswatchonly": false,
  "isscript": false,
  "pubkey": "0367c4f666f18279009c941e57fab3e42653c6553e5ca092c104d1db279e328a28",
  "iscompressed": true,
  "account": "",
  "timestamp": 1494285568,
  "hdkeypath": "m/0'/0'/1'",
  "hdmasterkeyid": "2333fedaf15c11ca577af6d9ac51d3c506fc13c5"
}
```
The `pubkey` address (`0367c4f666f18279009c941e57fab3e42653c6553e5ca092c104d1db279e328a28`) is what's required.

This process needs to be undertaken for _every_ address from a machine other than the one where the multisig is being buil. Obviously, if some third-party is creating the address, then the full publickey will need to be sent for _every_ address.

### Create the Address

A multisig can now be created with the `createmultisig` command:
```
machine1$ bitcoin-cli -named createmultisig nrequired=2 keys='''["'$address1'","0367c4f666f18279009c941e57fab3e42653c6553e5ca092c104d1db279e328a28"]'''
{
  "address": "2NAGfA4nW6nrZkD5je8tSiAcYB9xL2xYMCz",
  "redeemScript": "52210307fd375ed7cced0f50723e3e1a97bbe7ccff7318c815df4e99a59bc94dbcd819210367c4f666f18279009c941e57fab3e42653c6553e5ca092c104d1db279e328a2852ae"
}
```
Note that the `createmultisig` command can be used with asymmetric inputs. In this case, it processed `$address1`, which is a public-key hash address from a local machine, and `0367c4f666f18279009c941e57fab3e42653c6553e5ca092c104d1db279e328a28`, which is a public key from a remote machine. The `createmultisig` command is smart enough to try to convert any addresses into public keys ... but if that info isn't in your local wallet, expect to see a "no full public key for address" error.

> **M-OF-N VS N-OF-N:** This example shows the creation of a simple 2-of-2 multisig. If you instead want to create an m-of-n signature where "m < n", you adjust the `nrequired` field and/or the number of signatures in the `keys` JSON object. For a 1-of-2 multisig, you'd set `nrequired=1` while for a 2-of-3 multisig, you'd leave `nrequired=2`, but add one more public key or address to the `keys` listing.

When used correctly, `createmultisig` returns two results, both of which are critically important.

The _address_ is what you'll give out to people who want to send funds. You'll notice that it has a new prefix of `2`, rather than the prefixes you've seen on Bitcoin addresses to date. That's because `createmultisig` is actually creating a totally new type of address called a P2SH address. It works exactly like a standard P2PKH address for sending funds, but you'll need to do a lot more work to redeem. 

> **TESTNET vs MAINNET:** On testnet, the prefix for P2SH addresses is `2`, and on mainnet, it's `3`.

The _redeemScript_ is what you need to redeem the funds, along with the private keys for the associated addresses. This is another special feature of P2SH addresses and will be fully explained in "8.2: Scripting with a Multisig Script". For now, just be aware that it's a bit of data that's required to redeem your money.

### Save Your Work

Here's an important caveat: nothing about your multisig is saved into your wallet using these basic techniques. In order to later redeem money sent to this multisig address, you're going to need to retain two crucial bits of information:

   * A list of the Bitcoin addresses used in the multisig.
   * The `redeemScript` output by `createmultsig`.
   
Technically, the `redeemScript` can be recreated by rerunning `createmultisig` with the complete list of addresses and/or public keys _in the same order_ and with the right m-of-n count. But, it's better to hold onto it and save yourself the grief.

## Send to a Multisig Address

If you've got a multisignature in a convenient P2SH format, like the one generated by `bitcoin-cli`, it can be sent to exactly like a normal address.
```
$ utxo_txid=$(bitcoin-cli listunspent | jq -r '.[0] | .txid') 
$ utxo_vout=$(bitcoin-cli listunspent | jq -r '.[0] | .vout')
$ recipient="2NAGfA4nW6nrZkD5je8tSiAcYB9xL2xYMCz"

$ rawtxhex=$(bitcoin-cli -named createrawtransaction inputs='''[ { "txid": "'$utxo_txid'", "vout": '$utxo_vout' } ]''' outputs='''{ "'$recipient'": 1.2995}''')
$ bitcoin-cli -named decoderawtransaction hexstring=$rawtxhex 
{
  "txid": "ad16ea68a62af2d3930a48c5ca811bf66935f768bb369a85298ee6697167c667",
  "hash": "ad16ea68a62af2d3930a48c5ca811bf66935f768bb369a85298ee6697167c667",
  "size": 83,
  "vsize": 83,
  "version": 2,
  "locktime": 0,
  "vin": [
    {
      "txid": "ad16098f5c8904a4de7c152efc56359c22be37d447cd78019c398791a7bdd928",
      "vout": 0,
      "scriptSig": {
        "asm": "",
        "hex": ""
      },
      "sequence": 4294967295
    }
  ],
  "vout": [
    {
      "value": 1.29950000,
      "n": 0,
      "scriptPubKey": {
        "asm": "OP_HASH160 babf9063cee8ab6e9334f95f6d4e9148d0e551c2 OP_EQUAL",
        "hex": "a914babf9063cee8ab6e9334f95f6d4e9148d0e551c287",
        "reqSigs": 1,
        "type": "scripthash",
        "addresses": [
          "2NAGfA4nW6nrZkD5je8tSiAcYB9xL2xYMCz"
        ]
      }
    }
  ]
}
$ signedtx=$(bitcoin-cli -named signrawtransaction hexstring=$rawtxhex | jq -r '.hex')
$ bitcoin-cli -named sendrawtransaction hexstring=$signedtx
621be11aac439d6ec58be398058fc33c3e89cf45138a0e73e05b7001f9b6e328
```
As you can see, there was nothing unusual in the creation of the transaction, and it looked entirely normal, albeit with an address with a different prefix than normal (`2NAGfA4nW6nrZkD5je8tSiAcYB9xL2xYMCz`).

## Summary: Sending a Transaction with a Multisig

Multisigs addresses lock funds to multiple private keys — possibly requiring all of those private keys, and possibly requiring just some from the set. They're easy enough to create with `bitcoin-cli` and they're entirely easy to send to, but they actually make use of P2SH addresses, a large topic that will get more coverage in the future.

_What is the power of multisignatures?_ Multisignatures allow the modeling of a variety of financial arrangements, such as corporations, partnerships, committees, and other groups. A "1 of 2" multisig might be a married couple's joint bank account, while a "2 of 2" multisig might be used for large fund expenditures by a Limited Liability Partnership. Multisignatures also form one of the basis of Smart Contracts, such as escrow. For example, a real estate deal could be closed with a 2-of-3 multisig, where the signatures are submitted by the buyer, the seller, and an escrow agent. Once the escrow agent agrees that all of the conditions have been met, he frees up the funds for the seller; or alternatively, the buyer and seller can jointly free the funds.