1
0
mirror of https://github.com/DanielBroad/AVCSniffer synced 2025-06-07 07:56:29 +00:00
AVCSniffer/ipod_avc.c
2013-02-17 17:57:34 +00:00

137 lines
3.4 KiB
C
Executable File

/*
Copyright (C) 2006 Marcin Slonicki <marcin@softservice.com.pl>.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
This file is part of
iPod interface for TOYOTA AVC-Lan CD-Changer Emulator
v1.0
(C) 2006 SLONIU
http://www.softservice.com.pl/corolla/avc
marcin@softservice.com.pl
---------------------------------------------------------------------------
*/
//------------------------------------------------------------------------------
#include <avr/io.h>
#include <avr/signal.h>
#include <avr/interrupt.h>
#include <avr/sleep.h>
#include "delay.h"
#include "const.h"
#include "avclandrv.h"
#include "com232.h"
#include "timer.h"
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void PIN_Setup();
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
int main()
{
PIN_Setup();
//delay_ms(100);
AVCLan_Init();
#ifndef SNIFFER
iPod_Init();
#endif
#ifdef MONITOR
RS232_Print("********************** RESET *********************\n");
#endif
while (1) {
if (INPUT_IS_SET) { // if message from some device on AVCLan begin
AVCLan_Read_Message();
// check command from HU
if (answerReq != 0) AVCLan_SendAnswer();
}
#ifndef SNIFFER
// HandleEvent
if (Event & EV_STATUS)
{
Event &= ~EV_STATUS;
if (CD_Mode!=stStop) {
AVCLan_Send_Status();
};
}
if (Event & EV_DISPLAY)
{
Event &= ~EV_DISPLAY;
AVCLan_Send_Changer_Status();
}
#endif
RS232_SendStuff();
} // end while(1)
}
//------------------------------------------------------------------------------
void PIN_Setup()
{
outb(GIMSK, 0); // disable external interupts
outb(MCUCR, 0);
outb(TIMSK, (_BV(TOIE1))); // Enable timer1 interrupt
set_sleep_mode(SLEEP_MODE_IDLE);
//cbi(DDRD, 6);
//cbi(PORTD, 6);
// Timer 1
outb(TCCR1A, 0);
outb(TCCR1B, (_BV(CS12)) | (_BV(CS10))); // Prescaler /1024
outb(TCNT1H, TI1_H); // Load counter value hi
outb(TCNT1L, TI1_L); // Load counter value lo
RS232_Init();
Event = EV_NOTHING;
cli();
AuxInput=1;
#ifndef SNIFFER
SwitchInputs();
#endif
}
//------------------------------------------------------------------------------
SIGNAL(SIG_OVERFLOW1) // Timer1 overflow every 1Sec
{
outb(TCNT1H, TI1_H); // reload timer1
outb(TCNT1L, TI1_L);
if ((CD_Mode!=stStop)) {
Event |= EV_STATUS;
}
}
SIGNAL(SIG_COMPARATOR)
{
//do nothing we're now awake!
};
//------------------------------------------------------------------------------