Files
Toyota-AVC-LAN/hardware/mockingboard-v1/README.md
T
2026-07-08 14:37:17 -07:00

2.3 KiB

Hardware

I ordered the boards partially assembled from JLCPCB (to keep costs down, I ordered and soldered some non-standard/stocked parts myself.)

The non-populated/assembled BOM is:

Mouser #: Mfr. #: Desc.: Order Qty. Unit Price (USD)
579-ATTINY3216-SNR ATTINY3216-SNR 8-bit Microcontrollers - MCU 8-bit Microcontrollers - MCU 20MHz, 32KB, SOIC20, Ind 105C, Green, T&R 1 $1.27
523-L717SDE09PA4CH4 L717SDE09PA4CH4F D-Sub Standard Connectors D-Sub Standard Connectors D SUB R/A 1 $1.98
490-SJ-43514 SJ-43514 Phone Connectors Phone Connectors audio jack, 3.5 mm, rt, 4 conductor, through hole, 0 switches 1 $1.35
667-ERZ-V20D220 ERZ-V20D220 Varistors Varistors 22V 2000A ZNR SUR ABSORBER 20MM 1 $1.24
538-22-28-8093 22-28-8093 Headers & Wire Housings Headers & Wire Housings 2.54MM BREAKAWAY RA 9 CKT Gold 2 $0.76
865-XC6701D502JR-G XC6701D502JR-G LDO Voltage Regulators LDO Voltage Regulators 28V High Speed Voltage Regulator 1 $1.36
563-EXN-23350-BK EXN-23350-BK Enclosures, Boxes, & Cases Enclosures, Boxes, & Cases Extruded Aluminum Enclosure Black (1.4 X 2.7 X 1.9 In) 1 $14.40

An earlier version of the board* lacked cutouts in the corners to fit the ends of the intended housing, so I haven't used the listed enclosure (yet).

*Only version of the board I have ordered so far.

Flashing

The CMake target flash uses the AVRDude utility using the "serialupdi" programmer type. I use a USB => Serial converter with the Rx and Tx lines connected, using one of the options described by SpenceKonde here.