admin/Toyota-AVC-LAN
1
0
Fork 0
mirror of https://github.com/halleysfifthinc/AVCLAN-Mockingboard.git synced 2026-08-07 01:13:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
0830cf06dcb966b8a0ec8ea5b021bd80ca86967a
Toyota-AVC-LAN/src/avclandrv.c
T
Allen Hill 0830cf06dc Support fast-forward/rewind
2026-06-18 19:58:50 -07:00

1388 lines
42 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
/*
AVCLAN-Mockingboard
Copyright (C) 2015 Allen Hill <allenofthehills@gmail.com>
Portions of the following source code are based on code that is
copyright (C) 2006 Marcin Slonicki <marcin@softservice.com.pl>
copyright (C) 2007 Louis Frigon
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------------
AVC LAN Theory
The AVC LAN bus is an implementation of the IEBus (mode 1) which is a
differential signal; IEBus is electrically (but not logically) compatible with
CAN bus.
- Logical `1`: Potential difference between bus lines (BUS+ pin and BUS– pin)
is 20 mV or lower (floating).
- Logical `0`: Potential difference between bus lines (BUS+ pin and BUS– pin)
is 120 mV or higher (driving).
A nominal bit length is 39 us, composed of 3 periods: preparation,
synchronization, data.
Figure 1. AVCLAN Bus bit format
│ Prep │<─ Sync ─>│<─ Data ─>│ ...
Driving (logical `0`) ╭──────────╮──────────╮
│ │ │
Floating (logical `1`) ─────────╯ ╰──────────╰─────────
│ 6 μs │── 19 μs ─│─ 13 μs ──│
The logical value during the data period signifies the bit value, e.g. a bit
`0` continues the logical `0` (high potential difference between bus lines) of
the sync period thru the data period, and a bit `1` has a logical `1`
(low/floating potential between bus lines) during the data period. Using the
TCB pulse-width and frequency measure mode, the total bit length differs for
bit `1` and `0`; detailed bit timing can be found in "timing.h". The bus
idles at low potential (floating).
AVC LAN Frame Format
│ Bits │ Description
────────────────────────────────────────
| 1 │ Start bit
| 1 │ Direct/broadcast
| 12 │ Controller address
| 1 │ Parity
| 12 │ Peripheral address
| 1 │ Parity
| 1 │ *Acknowledge* (read below)
| 4 │ Control
| 1 │ Parity
| 1 │ *Acknowledge*
| 8 │ Message length (n)
| 1 │ Parity
| 1 │ *Acknowledge*
────────
| 8 │ Data
| 1 │ Parity
| 1 │ *Acknowledge*
*repeat `n` times*
A start bit is nominally 169 us high followed by 20 us low.
A bit `0` is dominant on the bus, which is a design choice that affects
bit/interpretation:
- Low addresses have priority upon transmission conflicts
- The broadcast bit is `1` (floating, no effort) for normal communication
- For acknowledge bits, the receiver extends the logical '0' of the sync
period to the length of a normal bit `0`. Hence, a NAK (bit `1`) is
literally the absence of an ACK.
No acknowledge bits are sent for broadcast frames.
--------------------------------------------------------------------------------------
*/
#include <avr/interrupt.h>
#include <avr/io.h>
#include <avr/sfr_defs.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <util/atomic.h>
#include "avclandrv.h"
#include "com232.h"
// F_CPU defined in timing.h and potentially needed by avr-libc (e.g. delay.h)
#include "timing.h"
// Name difference between avr-libc and Microchip pack
#if defined(EVSYS_ASYNCCH00_bm)
#define EVSYS_ASYNCCH0_0_bm EVSYS_ASYNCCH00_bm
#endif
#define READING_BYTE GPIOR1
#define READING_NBITS GPIOR2
#define READING_PARITY GPIOR3
#ifdef SOFTWARE_DEBUG
#define TCB_CNTMODE TCB_CNTMODE_FRQPW_gc
#else
#define TCB_CNTMODE TCB_CNTMODE_PW_gc
#endif
#define MAX_SEND_ATTEMPTS 3
AVCLAN_CD_Status_t cd_status;
uint8_t *cd_Track;
uint8_t *cd_Time_Min;
uint8_t *cd_Time_Sec;
cd_modes CD_Mode;
#ifdef SOFTWARE_DEBUG
volatile uint8_t pulse_count = 0;
volatile uint16_t period = 0;
#endif
volatile uint16_t pulsewidth;
// answers
//
// 0xFF placeholders are variant bytes filled in by callers writing directly
// into out->data[N] after memcpy.
static const uint8_t lancheck_resp[] = {0x00, dev_COMM_CTRL, dev_LAN, 0xFF,
0xFF};
static const uint8_t list_functions_resp[] = {
0x00, dev_COMM_CTRL, dev_COMM_v1, List_Functions_Resp, dev_CD_CHANGER};
static const uint8_t ping_resp[] = {0x00, dev_COMM_CTRL, dev_COMM_v1,
Ping_Resp, 0xFF, 0x00};
static const uint8_t function_change_resp[] = {0x00, dev_CD_CHANGER,
dev_COMM_v1, 0xFF, 0x01};
// No knowledge/understanding of field meaning/interpretation
static const uint8_t cdinitreport_resp[] = {
dev_CD_CHANGER, dev_STATUS, Initial_Report_Response, 0x01, 0x31, 0x10,
0x01, 0x01};
static const uint8_t cdloading_resp[] = {dev_CD_CHANGER,
dev_STATUS,
Loading_Status_Report,
0x00,
0x01,
0x00,
0x01,
0x00,
0x01,
0x02};
/* Disable serial and periodic interrupts during AVCLAN reads.
Not using cli() because AVCLAN reads depend on other interrupts. */
static inline void stopEvent() {
RTC.PITINTCTRL &= ~(1 << RTC_PI_bp);
USART0.CTRLA &= ~(1 << USART_RXCIE_bp);
}
// Re-enable serial and periodic interrupts.
static inline void startEvent() {
if (AVCLAN_isPlaying()) // Reenable PIT interrupt if currently playing
RTC.PITINTCTRL |= (1 << RTC_PI_bp);
USART0.CTRLA |= (1 << USART_RXCIE_bp);
}
// clang-format off
static inline void AVCLAN_setBusIdle() {
__asm__ __volatile__(
"cbi %[vporta_out], 4; \n\t"
"sbi %[vportc_out], 0; \n\t"
::[vporta_out] "I"(_SFR_IO_ADDR(VPORTA_OUT)),
[vportc_out] "I"(_SFR_IO_ADDR(VPORTC_OUT)));
}
static inline void AVCLAN_setBusDriven() {
__asm__ __volatile__(
"sbi %[vporta_out], 4; \n\t"
"cbi %[vportc_out], 0; \n\t"
::[vporta_out] "I"(_SFR_IO_ADDR(VPORTA_OUT)),
[vportc_out] "I"(_SFR_IO_ADDR(VPORTC_OUT)));
}
// clang-format on
// Returns true if device TX is muted on AVCLAN bus
static inline bool AVCLAN_ismuted() {
return (((VPORTA_DIR & PIN4_bm) | (VPORTA_DIR & PIN0_bm)) == 0);
}
// Mute device TX on AVCLAN bus
void AVCLAN_muteDevice(bool mute) {
if (mute) {
// clang-format off
__asm__ __volatile__("cbi %[vporta_dir], 4; \n\t" // set as INPUT (output values ignored)
"cbi %[vportc_dir], 0; \n\t" // set as INPUT (output values ignored)
::
[vporta_dir] "I"(_SFR_IO_ADDR(VPORTA_DIR)),
[vportc_dir] "I"(_SFR_IO_ADDR(VPORTC_DIR)));
// clang-format on
} else {
// clang-format off
__asm__ __volatile__("sbi %[vporta_dir], 4; \n\t"
"sbi %[vportc_dir], 0; \n\t"
::
[vporta_dir] "I"(_SFR_IO_ADDR(VPORTA_DIR)),
[vportc_dir] "I"(_SFR_IO_ADDR(VPORTC_DIR)));
// clang-format on
}
}
// Sets CD_mode to play and resets timer count (so that the next interrupt is in
// 1 sec)
void AVCLAN_startPlaying() {
CD_Mode = stPlay;
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
loop_until_bit_is_clear(RTC_PITSTATUS, RTC_CNTBUSY_bp);
RTC.CNT = 0;
RTC.PITINTCTRL |= (1 << RTC_PI_bp);
}
}
// Sets CD_mode to play and resets timer count (so that the next interrupt is in
// 1 sec)
void AVCLAN_stopPlaying() {
CD_Mode = stStop;
RTC.PITINTCTRL &= ~(1 << RTC_PI_bp);
}
void AVCLAN_init() {
// Pull-ups are disabled by default
// Set pin 6 and 7 as input
PORTA.DIRCLR = (PIN6_bm | PIN7_bm);
PORTA.PIN6CTRL = PORT_ISC_INPUT_DISABLE_gc; // Disable input buffer;
PORTA.PIN7CTRL = PORT_ISC_INPUT_DISABLE_gc; // recommended when using AC
// Analog comparator config
AC2.CTRLA = AC_OUTEN_bm | AC_HYSMODE_25mV_gc | AC_ENABLE_bm;
PORTB.DIRSET = PIN2_bm; // Enable AC2 OUT for LED
PORTB.PIN2CTRL = PORT_ISC_INPUT_DISABLE_gc; // Output only
// Set AC2 to generate events on async channel 0
EVSYS.ASYNCCH0 = EVSYS_ASYNCCH0_AC2_OUT_gc;
EVSYS.ASYNCUSER0 = EVSYS_ASYNCUSER0_ASYNCCH0_gc; // USER0 is TCB0
// TCB0 for read bit timing
TCB0.CTRLB = TCB_CNTMODE;
TCB0.INTCTRL = TCB_CAPT_bm;
TCB0.EVCTRL = TCB_CAPTEI_bm;
TCB0.CTRLA = TCB_CLKSEL | TCB_ENABLE_bm;
// TCB1 for send bit timing
TCB1.CTRLB = TCB_CNTMODE_INT_gc;
TCB1.CCMP = 0xFFFF;
TCB1.CTRLA = TCB_CLKSEL | TCB_ENABLE_bm;
// Setup RTC as 1 sec periodic timer
loop_until_bit_is_clear(RTC_STATUS, RTC_CTRLABUSY_bp);
RTC.CTRLA = RTC_PRESCALER_DIV1_gc;
RTC.CLKSEL = RTC_CLKSEL_INT32K_gc;
RTC.PITINTCTRL = RTC_PI_bm;
loop_until_bit_is_clear(RTC_PITSTATUS, RTC_CTRLBUSY_bp);
RTC.PITCTRLA = RTC_PERIOD_CYC32768_gc | RTC_PITEN_bm;
AVCLAN_setBusIdle();
AVCLAN_muteDevice(false); // unmute AVCLAN bus TX
cd_status.cds = cd_CD1;
cd_status.disc = 1;
cd_status.state = cd_SEEKING | cd_SEEKING_TRACK;
cd_status.flags = 0;
cd_status.flags2 = 0xC0;
cd_status.track = 1;
cd_status.mins = 0xFF;
cd_status.secs = 0x7F;
cd_Track = &cd_status.track;
cd_Time_Min = &cd_status.mins;
cd_Time_Sec = &cd_status.secs;
CD_Mode = stStop;
}
/* Pack a 0–99 count into 2-digit BCD. Values >99 (sentinels such as 0xFF /
0x7F meaning "no time") pass through unchanged so they survive the wire
round-trip. */
static uint8_t toBCD(uint8_t x) {
if (x > 99)
return x;
return (uint8_t)(((x / 10) << 4) | (x % 10));
}
// Serialize cd_status into the wire format. The struct layout mirrors the wire
// format byte-for-byte, except for track/mins/secs, which need converted from
// decimal to BCD
static void serializeCDStatus(uint8_t *dst) {
memcpy(dst, &cd_status, sizeof(cd_status));
dst[3] = toBCD(cd_status.track);
dst[4] = toBCD(cd_status.mins);
dst[5] = toBCD(cd_status.secs);
}
bool AVCLAN_isPlaying() { return (CD_Mode == stPlay); }
void AVCLAN_incrementTime() {
// Sentinel values (>99) mean "no time"; leave them alone until setTime()
// replaces them with a real count.
if (*cd_Time_Sec > 99)
return;
if (*cd_Time_Sec == 59) {
*cd_Time_Sec = 0;
if (*cd_Time_Min == 99)
*cd_Time_Min = 0;
else
(*cd_Time_Min)++;
} else
(*cd_Time_Sec)++;
}
void AVCLAN_setTime(uint8_t mins, uint8_t secs) {
*cd_Time_Min = mins;
*cd_Time_Sec = secs;
}
// Set AVC bus to `val` (logical 1 or 0) for `period` ticks of TCB1
void set_AVC_logic_for(uint8_t val, uint16_t period) {
TCB1.CNT = 0;
if (val) {
AVCLAN_setBusIdle(); // idle bus is logical 1
} else {
AVCLAN_setBusDriven();
}
while (TCB1.CNT <= period) {};
return;
}
typedef enum avclan_bit : uint8_t {
bit_zero = 0x00,
bit_one = 0x01,
bit_start = 0x10
} avclan_bit_t;
void AVCLAN_sendbit(avclan_bit_t bit) {
uint16_t zero_length, one_length;
switch (bit) {
case bit_zero:
zero_length = AVCLAN_BIT0_LOGIC_0;
one_length = AVCLAN_BIT0_LOGIC_1;
break;
case bit_one:
zero_length = AVCLAN_BIT1_LOGIC_0;
one_length = AVCLAN_BIT1_LOGIC_1;
break;
case bit_start:
zero_length = AVCLAN_STARTBIT_LOGIC_0;
one_length = AVCLAN_STARTBIT_LOGIC_1;
break;
default: __builtin_unreachable();
}
set_AVC_logic_for(0, zero_length);
set_AVC_logic_for(1, one_length);
}
void AVCLAN_sendbit_ACK() {
TCB1.CNT = 0;
// Wait for controller to begin ACK bit
while (BUS_IS_IDLE) {
// Wait for approx the length of a bit; any longer and something has clearly
// gone wrong
if (TCB1.CNT >= AVCLAN_BIT_LENGTH_MAX)
return;
}
AVCLAN_sendbit(bit_zero);
}
/* Returns true if the peripheral sent an ACK bit.
An ACK bit is a cooperative bit, where the sender starts (drives the bus) a
sync period, and allows the receiver to drive the bus (or not) to finish a "1"
bit.
*/
uint8_t AVCLAN_readbit_ACK() {
TCB1.CNT = 0;
set_AVC_logic_for(0, AVCLAN_BIT1_LOGIC_0);
AVCLAN_setBusIdle(); // Stop driving bus
while (true) {
if (!BUS_IS_IDLE && (TCB1.CNT > AVCLAN_READBIT_THRESHOLD))
break; // ACK
if (TCB1.CNT > AVCLAN_BIT_LENGTH_MAX)
return 0; // NAK
}
// Check/wait in case we get here before peripheral finishes ACK bit
while (!BUS_IS_IDLE) {
if (TCB1.CNT > AVCLAN_BIT_LENGTH_MAX)
return 0; // NAK
}
return 1;
}
#define AVCLAN_sendbits(bits, len) \
_Generic((bits), \
const uint16_t *: AVCLAN_sendbitsl, \
uint16_t *: AVCLAN_sendbitsl, \
const uint8_t *: AVCLAN_sendbitsi, \
uint8_t *: AVCLAN_sendbitsi)(bits, len)
// Send `len` bits on the AVCLAN bus; returns the even parity
avclan_bit_t AVCLAN_sendbitsi(const uint8_t *bits, int8_t len) {
uint8_t b = *bits;
uint8_t parity = 0;
int8_t len_mod8 = 8;
if (len & 0x7) {
len_mod8 = (int8_t)(len & 0x7);
b <<= (uint8_t)(8 - len_mod8);
}
while (len > 0) {
len -= len_mod8;
for (; len_mod8 > 0; len_mod8--) {
avclan_bit_t bit = (b & 0x80) != 0;
parity += (uint8_t)bit;
AVCLAN_sendbit(bit);
b <<= 1;
}
len_mod8 = 8;
b = *--bits;
}
return (parity & 1);
}
// Send `len` bits on the AVCLAN bus; returns the even parity
avclan_bit_t AVCLAN_sendbitsl(const uint16_t *bits, int8_t len) {
return AVCLAN_sendbitsi((const uint8_t *)bits + 1, len);
}
avclan_bit_t AVCLAN_sendbyte(const uint8_t *byte) {
uint8_t b = *byte;
uint8_t parity = 0;
for (uint8_t nbits = 8; nbits > 0; nbits--) {
avclan_bit_t bit = (b & 0x80) != 0;
parity += (uint8_t)bit;
AVCLAN_sendbit(bit);
b <<= 1;
}
return (parity & 1);
}
ISR(TCB0_INT_vect) {
#ifdef SOFTWARE_DEBUG
pulse_count++;
period = TCB0.CNT;
#endif
READING_BYTE <<= 1;
// If the logical `0` pulse was less than the sync + data period threshold,
// bit was a 1
pulsewidth = TCB0.CCMP;
if (pulsewidth < (uint16_t)AVCLAN_READBIT_THRESHOLD) {
READING_BYTE++;
READING_PARITY++;
}
READING_NBITS--;
}
#define AVCLAN_readbits(bits, len) \
_Generic((bits), \
const uint16_t *: AVCLAN_readbitsl, \
uint16_t *: AVCLAN_readbitsl, \
const uint8_t *: AVCLAN_readbitsi, \
uint8_t *: AVCLAN_readbitsi)(bits, len)
// Read `len` bits on the AVCLAN bus; returns the even parity
uint8_t AVCLAN_readbitsi(uint8_t *bits, uint8_t len) {
cli();
READING_BYTE = 0;
READING_PARITY = 0;
READING_NBITS = len;
sei();
TCB1.CNT = 0;
while (READING_NBITS) {
// 200% the duration of `len` bits
if (TCB1.CNT > ((uint16_t)AVCLAN_BIT_LENGTH_MAX * 2 * len)) {
READING_BYTE = 0;
READING_PARITY = 0;
break; // Should have finished by now; something's wrong
}
};
cli();
*bits = READING_BYTE;
uint8_t parity = READING_PARITY;
sei();
return (parity & 1);
}
// Read `len` bits on the AVCLAN bus; returns the even parity
uint8_t AVCLAN_readbitsl(uint16_t *bits, int8_t len) {
uint8_t parity = 0;
if (len > 8) {
uint8_t over = len - 8;
parity = AVCLAN_readbitsi((uint8_t *)bits + 1, over);
len -= over;
}
parity += AVCLAN_readbitsi((uint8_t *)bits + 0, len);
return (parity & 1);
}
// Read a byte on the AVCLAN bus
uint8_t AVCLAN_readbyte(uint8_t *byte) {
cli();
READING_BYTE = 0;
READING_PARITY = 0;
READING_NBITS = 8;
sei();
TCB1.CNT = 0;
while (READING_NBITS) {
// 200% the length of a byte
if (TCB1.CNT > ((uint16_t)AVCLAN_BIT_LENGTH_MAX * 2 * 8)) {
READING_BYTE = 0;
READING_PARITY = 0;
break; // Should have finished by now; something's wrong
}
};
cli();
*byte = READING_BYTE;
uint8_t parity = READING_PARITY;
sei();
return (parity & 1);
}
uint8_t AVCLAN_readframe(AVCLAN_frame_t *frame, log_t print) {
struct errtype {
// Error enum is ordered such that a lower numeric value corresponds to more
// successful read
enum : uint8_t {
NO_ERROR = 0x00,
BAD_DATA_PARITY = 0x01,
BAD_LENGTH_RANGE,
BAD_LENGTH_PARITY,
BAD_PERIPHERAL_PARITY,
BAD_CONTROLLER_PARITY,
BAD_CONTROL_PARITY,
STARTBIT_TOO_SHORT,
STARTBIT_TOO_LONG,
} errno;
union {
uint8_t val; // BAD_LENGTH_RANGE: the out-of-range length value
struct {
uint16_t read_val;
uint8_t parity; // received (bad) parity bit
};
};
} err = {0};
stopEvent(); // disable timer1 interrupt
uint8_t tmp = 0;
uint16_t startbitlen = TCB1.CNT = 0;
while (!BUS_IS_IDLE) {
startbitlen = TCB1.CNT;
if (startbitlen > (uint16_t)AVCLAN_STARTBIT_LOGIC_0 * 1.2) {
// hang until bus is idle to avoid repeated STARTBIT_TOO_LONG
// errors when the AC is stuck (observed when cycling car power and
// mockingboard is externally powered by serial/updi)
while (!BUS_IS_IDLE) {}
err.errno = STARTBIT_TOO_LONG;
goto handle_err;
}
}
if (startbitlen < (uint16_t)(AVCLAN_STARTBIT_LOGIC_0 * 0.8)) {
err.errno = STARTBIT_TOO_SHORT;
// We missed the beginning of this message; wait for it to finish (bus
// continuously idle for >1 bit length) before returning, so we don't have
// multiple false-starts while the in-progress message keeps sending more
// bits.
TCB1.CNT = 0;
while (TCB1.CNT < (uint16_t)(AVCLAN_BIT_LENGTH_MAX * 1.2)) {
if (!BUS_IS_IDLE)
TCB1.CNT = 0;
}
goto handle_err;
}
// Otherwise that was a start bit
AVCLAN_readbits(&tmp, 1);
frame->is_unicast = tmp;
uint8_t parity = AVCLAN_readbits(&frame->controller_addr, 12);
AVCLAN_readbits(&tmp, 1);
if (parity != (tmp &= 1)) {
err.errno = BAD_CONTROLLER_PARITY;
if (print.verbose) {
err.read_val = frame->controller_addr;
err.parity = tmp;
}
goto handle_err;
}
parity = AVCLAN_readbits(&frame->peripheral_addr, 12);
AVCLAN_readbits(&tmp, 1);
if (parity != (tmp &= 1)) {
err.errno = BAD_PERIPHERAL_PARITY;
if (print.verbose) {
err.read_val = frame->peripheral_addr;
err.parity = tmp;
}
goto handle_err;
}
bool shouldACK = !AVCLAN_ismuted() && (frame->peripheral_addr == DEVICE_ADDR);
if (shouldACK)
AVCLAN_sendbit_ACK();
else
AVCLAN_readbits(&tmp, 1);
parity = AVCLAN_readbits(&frame->control, 4);
AVCLAN_readbits(&tmp, 1);
if (parity != (tmp &= 1)) {
err.errno = BAD_CONTROL_PARITY;
if (print.verbose) {
err.read_val = frame->control;
err.parity = tmp;
}
goto handle_err;
} else if (shouldACK) {
AVCLAN_sendbit_ACK();
} else {
AVCLAN_readbits(&tmp, 1);
}
parity = AVCLAN_readbyte(&frame->length);
AVCLAN_readbits(&tmp, 1);
if (parity != (tmp &= 1)) {
err.errno = BAD_LENGTH_PARITY;
if (print.verbose) {
err.read_val = frame->length;
err.parity = tmp;
}
goto handle_err;
} else if (shouldACK) {
AVCLAN_sendbit_ACK();
} else {
AVCLAN_readbits(&tmp, 1);
}
if (frame->length == 0 || frame->length > MAXMSGLEN) {
err.errno = BAD_LENGTH_RANGE;
err.val = frame->length;
goto handle_err;
}
for (uint8_t i = 0; i < frame->length; i++) {
parity = AVCLAN_readbyte(&frame->data[i]);
AVCLAN_readbits(&tmp, 1);
if (parity != (tmp &= 1)) {
err.errno = BAD_DATA_PARITY;
if (print.verbose) {
err.read_val = frame->data[i];
err.parity = tmp;
}
goto handle_err;
} else if (shouldACK) {
AVCLAN_sendbit_ACK();
} else {
AVCLAN_readbits(&tmp, 1);
}
}
if (false) {
handle_err:;
startEvent();
RS232_Print("ERR(read): ");
switch (err.errno) {
case STARTBIT_TOO_SHORT: RS232_Print("start bit too short"); break;
case STARTBIT_TOO_LONG: RS232_Print("start bit too long"); break;
case BAD_CONTROLLER_PARITY:
RS232_Print("reading controller addr.");
goto VERBOSE;
case BAD_PERIPHERAL_PARITY:
RS232_Print("reading peripheral addr.");
goto VERBOSE;
case BAD_CONTROL_PARITY: RS232_Print("reading control"); goto VERBOSE;
case BAD_LENGTH_PARITY: RS232_Print("reading length"); goto VERBOSE;
case BAD_LENGTH_RANGE:
RS232_Print("bad length 0x");
RS232_PrintHex4(err.val);
break;
case BAD_DATA_PARITY: RS232_Print("reading data"); goto VERBOSE;
case NO_ERROR:
__builtin_unreachable();
VERBOSE:
if (print.verbose) {
RS232_Print("; read 0x");
RS232_PrintHex(err.read_val);
RS232_Print(" and got bad parity ");
RS232_PrintHex4(err.parity);
}
}
RS232_Print("\n");
} else {
startEvent();
}
// Only print if some data has been correctly received
if (print.print && (err.errno < STARTBIT_TOO_SHORT)) {
if (err.errno > BAD_DATA_PARITY)
frame->length = 0;
AVCLAN_printframe(frame, print.binary);
}
return err.errno;
}
uint8_t AVCLAN_sendframe(const AVCLAN_frame_t *frame, log_t print) {
struct errtype {
// Error enum is ordered such that a lower numeric value corresponds to more
// success
enum : uint8_t {
NO_ERROR = 0x00,
NAK_DATA = 0x01,
NAK_MESSAGE_LENGTH,
NAK_CONTROL,
NAK_ADDRESS,
BUSY,
MUTED,
} errno;
uint8_t val;
} err = {0};
if (AVCLAN_ismuted()) {
err.errno = MUTED;
goto handle_err;
}
stopEvent();
// wait for free line
TCB1.CNT = 0;
while (BUS_IS_IDLE) {
// Wait for 120% of a bit length
if (TCB1.CNT >= (uint16_t)(AVCLAN_BIT_LENGTH_MAX * 2))
break;
}
// End of first loop could be due to bus being driven
TCB1.CNT = 0;
if (!BUS_IS_IDLE) {
// Some other device started sending
// Can't yet simultaneously send and recieve to do proper CSMA/CD
err.errno = BUSY;
goto handle_err;
// Beginnings of CSMA/CD
// do {
// if (TCB1.CNT >= (uint16_t)(AVCLAN_STARTBIT_LOGIC_0 * 1.2))
// return 1; // Something's hinky; nothing is longer than the start bit
// } while (!BUS_IS_IDLE);
// if (TCB1.CNT <= (uint16_t)(AVCLAN_STARTBIT_LOGIC_0 * 0.8))
// return 1; // Shouldn't be possible (waiting 2 bit lengths with idle
// bus,
// // then next bit should be a long one ie start)
// set_AVC_logic_for(1, AVCLAN_STARTBIT_LOGIC_1); // wait for end of start
// bit
} else {
AVCLAN_sendbit(bit_start);
}
AVCLAN_sendbits(&(uint8_t){frame->is_unicast}, 1);
avclan_bit_t parity = AVCLAN_sendbits(&frame->controller_addr, 12);
AVCLAN_sendbit(parity);
parity = AVCLAN_sendbits(&frame->peripheral_addr, 12);
AVCLAN_sendbit(parity);
if (frame->is_unicast && !AVCLAN_readbit_ACK()) {
err.errno = NAK_ADDRESS;
goto handle_err;
}
parity = AVCLAN_sendbits(&frame->control, 4);
AVCLAN_sendbit(parity);
if (frame->is_unicast && !AVCLAN_readbit_ACK()) {
err.errno = NAK_CONTROL;
goto handle_err;
}
parity = AVCLAN_sendbyte(&frame->length); // data length
AVCLAN_sendbit(parity);
if (frame->is_unicast && !AVCLAN_readbit_ACK()) {
err.errno = NAK_MESSAGE_LENGTH;
goto handle_err;
}
for (uint8_t i = 0; i < frame->length; i++) {
parity = AVCLAN_sendbyte(&frame->data[i]);
AVCLAN_sendbit(parity);
// Based on the µPD6708 datasheet, ACK bit for broadcast doesn't seem
// necessary (i.e. This deviates from the previous broadcast specific
// function that sent an extra `1` bit after each byte/parity)
if (frame->is_unicast && !AVCLAN_readbit_ACK()) {
err.errno = NAK_DATA;
err.val = i;
goto handle_err;
}
// else
// AVCLAN_sendbit_1();
}
// back to read mode
if (false) {
handle_err:;
startEvent();
RS232_Print("Error");
switch (err.errno) {
case MUTED: RS232_Print(": Device muted"); break;
case BUSY: RS232_Print(": Busy bus"); break;
case NAK_ADDRESS:
case NAK_CONTROL:
case NAK_MESSAGE_LENGTH:
case NAK_DATA:
RS232_Print(" NAK: ");
switch (err.errno) {
case NAK_ADDRESS: RS232_Print("address"); break;
case NAK_CONTROL: RS232_Print("Control"); break;
case NAK_MESSAGE_LENGTH: RS232_Print("Message length"); break;
case NAK_DATA:
RS232_Print(" data[");
RS232_PrintDec(err.val);
RS232_Print("]");
break;
case NO_ERROR:
case MUTED:
case BUSY: __builtin_unreachable();
}
break;
case NO_ERROR: __builtin_unreachable();
}
RS232_Print("\n");
} else {
startEvent();
}
if (print.print)
AVCLAN_printframe(frame, print.binary);
return err.errno;
}
#define PACK3(a, b, c) (((uint32_t)(a) << 16) | ((uint32_t)(b) << 8) | (c))
response_t AVCLAN_handleframe(const AVCLAN_frame_t *in, AVCLAN_frame_t *out) {
response_t respond = r_Nothing;
if (AVCLAN_ismuted() || in->length < 3)
return respond;
out->controller_addr = DEVICE_ADDR;
out->control = 0xF;
const uint8_t *data = in->data;
const uint8_t b0 = *data++;
const uint8_t b1 = *data++;
const uint8_t b2 = *data++;
uint8_t b3 = 0;
if (in->length > 3) // the shortest known/valid messages are 3 bytes long
b3 = *data++;
if (!in->is_unicast) {
// Broadcast: bytes are (from, to, action, [extra...]).
// peripheral_addr unchecked — always 0xFFF or 0x1FF in known traffic.
switch (PACK3(b0, b1, b2)) {
case PACK3(dev_LAN, dev_COMM_CTRL, Lancheck_Scan_Req):
out->length = sizeof(lancheck_resp);
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
memcpy(out->data, lancheck_resp, sizeof(lancheck_resp));
out->data[3] = Lancheck_Scan_Resp;
out->data[4] = 0x01;
respond = r_Handled;
break;
case PACK3(dev_LAN, dev_COMM_CTRL, Lancheck_Req):
out->length = sizeof(lancheck_resp);
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
memcpy(out->data, lancheck_resp, sizeof(lancheck_resp));
out->data[3] = Lancheck_Resp;
out->data[4] = 0x00;
respond = r_Handled;
break;
case PACK3(dev_LAN, dev_COMM_CTRL, Lancheck_End_Req):
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
out->length = sizeof(lancheck_resp) - 1;
memcpy(out->data, lancheck_resp, out->length);
out->data[3] = Lancheck_End_Resp;
respond = r_Handled;
break;
case PACK3(dev_COMM_v1, dev_COMM_CTRL, Current_Function):
case PACK3(dev_COMM_v2, dev_COMM_CTRL, Current_Function):
if ((b3 == dev_CD_CHANGER) && !AVCLAN_isPlaying()) {
if (cd_status.mins > 99)
cd_status.mins = 0;
if (cd_status.secs > 99)
cd_status.secs = 0;
cd_status.state = cd_SEEKING | cd_SEEKING_TRACK;
cd_status.flags2 = 0xc0;
AVCLAN_generateStatus(out, true, dev_STATUS);
AVCLAN_startPlaying();
respond = r_NormalizeState;
}
break;
case PACK3(dev_COMM_v1, dev_COMM_CTRL, Ping_Req):
case PACK3(dev_COMM_v2, dev_COMM_CTRL, Ping_Req):
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
out->length = sizeof(ping_resp);
memcpy(out->data, ping_resp, sizeof(ping_resp));
out->data[4] = b3;
respond = r_Handled;
break;
case PACK3(dev_COMM_v1, dev_COMM_CTRL, List_Functions_Req):
case PACK3(dev_COMM_v2, dev_COMM_CTRL, List_Functions_Req):
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
out->length = sizeof(list_functions_resp);
memcpy(out->data, list_functions_resp, sizeof(list_functions_resp));
respond = r_Handled;
break;
// case Restart_Lan: not handled
}
} else if (in->peripheral_addr == DEVICE_ADDR && b0 == 0x00) {
// Unicast to CD changer: bytes are (0x00, from, to, action, [extra...]).
switch (PACK3(b1, b2, b3)) {
case PACK3(dev_COMM_v1, dev_CD_CHANGER, Enable_Function_Req):
[[fallthrough]];
case PACK3(dev_COMM_v2, dev_CD_CHANGER, Enable_Function_Req):
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
out->length = sizeof(function_change_resp);
memcpy(out->data, function_change_resp, sizeof(function_change_resp));
out->data[3] = Enable_Function_Resp;
cd_status.state = 0;
cd_status.flags2 = 0x80;
respond = r_StatusReport;
break;
case PACK3(dev_COMM_v1, dev_CD_CHANGER, Disable_Function_Req):
[[fallthrough]];
case PACK3(dev_COMM_v2, dev_CD_CHANGER, Disable_Function_Req):
AVCLAN_stopPlaying();
out->length = sizeof(function_change_resp);
memcpy(out->data, function_change_resp, sizeof(function_change_resp));
out->data[3] = Disable_Function_Resp;
cd_status.state = cd_PLAYBACK | cd_SEEKING_TRACK;
cd_status.flags2 = 0x80;
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Eject): {
// "Eject" label is multiply wrong; proper meaning unclear:
// - First observed on initial multiple presses of "CD" button,
// triggering (after {0x00, dev_CD_CHANGER, dev_COMM_v1, Insertion,
// 0x01} response) proper activation of mockingboard/cd-changer.
// - Subsequently observed when pressing (technically
// releasing?) the fast-forward button and rewind
if (cd_status.state | cd_SEEKING) { // FF/RW button released
cd_status.state &= ~cd_SEEKING;
} else {
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
{
const uint8_t msg[] = {0x00, dev_CD_CHANGER, dev_CMD_SW, Insertion,
0x01};
out->length = sizeof(msg);
memcpy(out->data, msg, sizeof(msg));
}
respond = r_Handled;
}
break;
}
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Initial_Report_Request):
[[fallthrough]];
case PACK3(dev_STATUS, dev_CD_CHANGER, Initial_Report_Request):
out->data[0] = 0x00; // Add leading zero-byte for unicast comms
out->length = sizeof(cdinitreport_resp) + 1;
memcpy(&out->data[1], cdinitreport_resp, sizeof(cdinitreport_resp));
out->data[2] = b1; // respond to device that requested
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
respond = r_Handled;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Playback_Request): [[fallthrough]];
case PACK3(dev_STATUS, dev_CD_CHANGER, Playback_Request):
out->data[0] = 0x00;
out->data[1] = dev_CD_CHANGER;
out->data[2] = b1;
out->data[3] = Playback_Report;
out->length = sizeof(AVCLAN_CD_Status_t) + 4;
serializeCDStatus(&out->data[4]);
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
respond = r_Handled;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Loading_Request2): [[fallthrough]];
case PACK3(dev_STATUS, dev_CD_CHANGER, Loading_Request2):
out->data[0] = 0x00;
out->length = sizeof(cdloading_resp) + 1;
memcpy(&out->data[1], cdloading_resp, sizeof(cdloading_resp));
out->data[2] = b1;
out->data[3] = Loading_Response2;
out->is_unicast = true;
out->peripheral_addr = HU_ADDR;
respond = r_Handled;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Track_Seek_Up):
cd_status.state = cd_SEEKING_TRACK;
if (*cd_Track < 98)
++*cd_Track;
else
*cd_Track = 1;
*cd_Time_Min = 0xff;
*cd_Time_Sec = 0x7f;
cd_status.flags2 = 0xc0;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_TrackChange;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Track_Seek_Down):
cd_status.state = cd_SEEKING_TRACK;
// Track down returns to track beginning if in ~middle of song
if (*cd_Time_Min == 0 && *cd_Time_Sec < 0x05) {
if (*cd_Track > 1)
--*cd_Track;
else
*cd_Track = 99;
}
*cd_Time_Min = 0xff;
*cd_Time_Sec = 0x7f;
cd_status.flags2 = 0xc0;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_TrackChange;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Track_Fast_Forward): {
cd_status.state |= cd_SEEKING;
*cd_Time_Sec += 15;
if (*cd_Time_Sec > 60) {
*cd_Time_Sec -= 60;
++*cd_Time_Min;
}
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_Handled;
break;
}
case PACK3(dev_CMD_SW, dev_CD_CHANGER, Track_Rewind): {
cd_status.state |= cd_SEEKING;
if (*cd_Time_Sec < 15) {
if (*cd_Time_Min > 0) {
uint8_t d = 15 - *cd_Time_Sec;
*cd_Time_Sec = 60 - d;
--*cd_Time_Min;
} else {
*cd_Time_Min = 0;
*cd_Time_Sec = 0;
}
} else
*cd_Time_Sec -= 15;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_Handled;
break;
}
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Enable_Random):
cd_status.flags |= cd_RANDOM;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Disable_Random):
cd_status.flags &= ~cd_RANDOM;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Enable_Repeat):
cd_status.flags |= cd_REPEAT;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Disable_Repeat):
cd_status.flags &= ~cd_REPEAT;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Enable_Disk_Random):
cd_status.flags |= cd_DISK_RANDOM;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Disable_Disk_Random):
cd_status.flags &= ~cd_DISK_RANDOM;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Enable_Disk_Repeat):
cd_status.flags |= cd_DISK_REPEAT;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
case PACK3(dev_CMD_SW, dev_CD_CHANGER, CD_Disable_Disk_Repeat):
cd_status.flags &= ~cd_DISK_REPEAT;
AVCLAN_generateStatus(out, true, dev_CMD_SW);
respond = r_StatusReport;
break;
}
}
return respond;
}
#undef PACK3
RFrame_t *AVCLAN_statemachine(RFrame_t *resp) {
AVCLAN_frame_t *out = resp->frame;
switch (resp->r) {
case r_Ejection: {
const uint8_t play[] = {0x00, dev_COMM_CTRL, dev_COMM_v1,
Insertion, dev_CD_CHANGER, 0x01};
out->length = sizeof(play);
memcpy(out->data, play, sizeof(play));
}
resp->r = r_Report_Load;
break;
case r_Report_Load:
out->is_unicast = false;
out->peripheral_addr = 0x1FF;
out->length = sizeof(cdloading_resp) + 1;
memcpy(out->data, cdloading_resp, sizeof(cdloading_resp));
out->data[1] = dev_STATUS;
out->data[2] = Loading_Status_Report;
resp->r = r_Handled;
break;
case r_TrackChange: AVCLAN_setTime(0x00, 0x00); [[fallthrough]];
case r_NormalizeState:
AVCLAN_normalizeState();
AVCLAN_generateStatus(out, true, dev_STATUS);
resp->r = r_Handled;
break;
case r_StartPlaying:
AVCLAN_generateStatus(out, true, dev_STATUS);
resp->r = r_NormalizeState;
break;
case r_StatusReport:
AVCLAN_generateStatus(out, true, dev_STATUS);
resp->r = r_Handled;
break;
case r_Handled: [[fallthrough]];
case r_Nothing: [[fallthrough]];
default: resp->r = r_Nothing;
}
return resp;
}
uint8_t AVCLAN_tryrespond(const AVCLAN_frame_t *resp) {
uint8_t r = 0;
for (uint8_t i = 0; i < MAX_SEND_ATTEMPTS; i++) {
r = AVCLAN_sendframe(resp, (log_t){0});
if (!r) // Send succeeded
break;
}
return r;
}
void AVCLAN_printframe(const AVCLAN_frame_t *frame, bool binary) {
if (binary) {
uint8_t buffer[8];
buffer[0] = 0x10; // Data Link Escape, signaling binary data forthcoming
buffer[1] = frame->is_unicast;
// Send addresses in big-endian order
buffer[2] = (uint8_t)(frame->controller_addr >> 8);
buffer[3] = (uint8_t)frame->controller_addr;
buffer[4] = (uint8_t)(frame->peripheral_addr >> 8);
buffer[5] = (uint8_t)frame->peripheral_addr;
buffer[6] = frame->control;
buffer[7] = frame->length;
RS232_sendbytes((uint8_t *)&buffer, 8);
RS232_sendbytes(frame->data, frame->length);
buffer[0] = 0x17; // End of transmission block
buffer[1] = 0x0D; // \r
buffer[2] = 0x0A; // \n
RS232_sendbytes((uint8_t *)&buffer, 3);
} else {
RS232_PrintHex4(frame->is_unicast);
RS232_Print(" 0x");
RS232_PrintHex12(frame->controller_addr);
RS232_Print(" 0x");
RS232_PrintHex12(frame->peripheral_addr);
RS232_Print(" 0x");
RS232_PrintHex4(frame->control);
RS232_Print(" 0x");
RS232_PrintHex4(frame->length);
for (uint8_t i = 0; i < frame->length; i++) {
RS232_Print(" 0x");
RS232_PrintHex8(frame->data[i]);
}
RS232_Print("\n");
}
}
uint8_t AVCLAN_parseframe(const uint8_t *bytes, uint8_t len,
AVCLAN_frame_t *frame) {
struct errtype {
enum : uint8_t {
TOO_SHORT = 0x01,
MISMATCH_LENGTH,
LENGTH_TOO_BIG,
} errno;
uint8_t val;
} err = {0};
if (len < sizeof(AVCLAN_frame_t)) {
err.errno = TOO_SHORT;
goto handle_err;
}
const uint8_t *last = bytes + len;
frame->is_unicast = *bytes++;
frame->controller_addr = bytes[0] | ((uint16_t)bytes[1] << 8);
bytes += 2;
frame->peripheral_addr = bytes[0] | ((uint16_t)bytes[1] << 8);
bytes += 2;
frame->control = *bytes++;
frame->length = *bytes++;
if (frame->length > MAXMSGLEN) {
err.errno = LENGTH_TOO_BIG;
err.val = frame->length;
goto handle_err;
}
if ((bytes + frame->length) <= last) {
memcpy(frame->data, bytes, frame->length);
} else {
err.errno = MISMATCH_LENGTH;
goto handle_err;
}
if (false) {
handle_err:;
RS232_Print("ERR(parse): ");
switch (err.errno) {
case TOO_SHORT:
RS232_Print("not enough bytes too fill AVCLAN frame");
break;
case MISMATCH_LENGTH:
RS232_Print("frame->length is longer than remaining data");
break;
case LENGTH_TOO_BIG:
RS232_Print("frame->length exceeds MAXMSGLEN: 0x");
RS232_PrintHex8(err.val);
break;
default: break;
}
RS232_Print("\n");
}
return err.errno;
}
// Only used for regularly scheduled periodic updates
AVCLAN_frame_t *AVCLAN_getStatusFrame() {
static uint8_t status_data[sizeof(AVCLAN_CD_Status_t) + 3] = {0};
static AVCLAN_frame_t status = {.is_unicast = false,
.controller_addr = DEVICE_ADDR,
.peripheral_addr = 0x1FF,
.control = 0xF,
.length = sizeof(status_data),
.data = status_data};
return &status;
}
// Used for changed status messages
void AVCLAN_generateStatus(AVCLAN_frame_t *status, bool is_unicast,
devices to) {
*status = (AVCLAN_frame_t){
.is_unicast = is_unicast,
.controller_addr = DEVICE_ADDR,
.peripheral_addr = (is_unicast) ? HU_ADDR : 0x1FF,
.control = 0xF,
.length = sizeof(AVCLAN_CD_Status_t) + ((is_unicast) ? 4 : 3),
.data = status->data, // don't overwrite data pointer
};
uint8_t *data = status->data;
if (is_unicast)
*data++ = 0x00;
*data++ = dev_CD_CHANGER;
*data++ = to;
*data++ = Status_Report;
serializeCDStatus(data);
}
void AVCLAN_normalizeState() {
// if (cd_status.state != cd_PLAYBACK) {
if (cd_status.mins > 99)
cd_status.mins = 0;
if (cd_status.secs > 99)
cd_status.secs = 0;
cd_status.state = cd_PLAYBACK;
cd_status.flags &= (uint8_t)~(cd_DISK_SCAN | cd_SCAN);
cd_status.flags2 = 0x80;
// }
}
#ifdef SOFTWARE_DEBUG
uint16_t pulses[100];
uint16_t periods[100];
void AVCLan_Measure() {
stopEvent();
uint8_t tmp = 0;
RS232_Print(
"Timing config: F_CPU=" STR(F_CPU) ", TCB_CLKSEL=" STR(TCB_CLKSEL) "\n");
RS232_Print("Sampling bit (pulse-width and period) timing...\n");
for (uint8_t n = 0; n < 100; n++) {
while (pulse_count == tmp) {}
pulses[n] = pulsewidth;
periods[n] = period;
tmp = pulse_count;
}
RS232_Print("Pulses:\n");
for (uint8_t i = 0; i < 100; i++) {
RS232_PrintHex8((uint8_t)(pulses[i] >> 8));
RS232_PrintHex8((uint8_t)pulses[i]);
RS232_Print("\n");
}
RS232_Print("Periods:\n");
for (uint8_t i = 0; i < 100; i++) {
RS232_PrintHex8((uint8_t)(periods[i] >> 8));
RS232_PrintHex8((uint8_t)periods[i]);
RS232_Print("\n");
}
RS232_Print("\nDone.\n");
startEvent();
}
#endif
Reference in New Issue View Git Blame Copy Permalink