// copyright (C) 2006 Marcin Slonicki <marcin@softservice.com.pl>
// copyright (C) 2007 Louis Frigon
// Copyright (C) 2015 Allen Hill <allenofthehills@gmail.com>
// SPDX-License-Identifier: GPL-3.0-or-later

// ATtiny3216 board bring-up: main-clock prescaler + GPIO config for pins not
// owned by a peripheral's own init.

#include <avr/interrupt.h>
#include <avr/io.h>
#include <avr/xmega.h> // _PROTECTED_WRITE

#include "board.h"

void board_init(void) {
  // Main clock prescale (CLK_PRESCALE / CLK_PRESCALE_DIV come from the build).
  _PROTECTED_WRITE(CLKCTRL.MCLKCTRLB, (CLK_PRESCALE | CLK_PRESCALE_DIV));

  // Set pins PC2-3, PB0,3-5 as inputs
  PORTC.DIRCLR = (PIN2_bm | // Unconnected
                  PIN3_bm); // CTS
  PORTB.DIRCLR = (PIN0_bm | // Unconnected
                  PIN3_bm | // IGN_SENSE
                  PIN4_bm | // Unused, but connected to WOC (PC0)
                  PIN5_bm); // Unused, but connected to WOD (PC1)

  // Enable pull-up resistor and disable input buffer (reduces any EM caused
  // pin toggling and saves power) for unused and unconnected pins
  PORTC.PIN2CTRL = PORT_PULLUPEN_bm | PORT_ISC_INPUT_DISABLE_gc;
  PORTB.PIN0CTRL = PORT_PULLUPEN_bm | PORT_ISC_INPUT_DISABLE_gc;

  // TODO: Remove once IGN_SENSE hardware is fixed
  PORTB.DIRSET = PIN3_bm;
  PORTB.OUTSET = PIN3_bm;

  // Output only pins: PA3-5, PB1-2,4-5; PC0-1
  // TODO: TxD (PA1), RTS (PA3) is output only, test if RxD needs the input
  // buffer or if the UART peripheral bypasses it
  PORTA.PIN3CTRL = PORT_ISC_INPUT_DISABLE_gc; // RTS
  PORTA.PIN4CTRL = PORT_ISC_INPUT_DISABLE_gc; // WOA
  PORTA.PIN5CTRL = PORT_ISC_INPUT_DISABLE_gc; // WOB
  PORTB.PIN1CTRL = PORT_ISC_INPUT_DISABLE_gc; // MIC_CONTROL
  PORTB.PIN4CTRL = PORT_ISC_INPUT_DISABLE_gc; // non-driving WOC
  PORTB.PIN5CTRL = PORT_ISC_INPUT_DISABLE_gc; // non-driving WOD
  PORTC.PIN0CTRL = PORT_ISC_INPUT_DISABLE_gc; // WOC
  PORTC.PIN1CTRL = PORT_ISC_INPUT_DISABLE_gc; // WOD
}

void board_interruptsEnable(void) { sei(); }